KN Inconspicuous Steel Wire Tank Barrier Fence Engineering Obstacles Anti-tank Wire Net
|
KN Inconspicuous Steel Wire Tank Barrier Fence Engineering Obstacles Anti-tank Wire Net
Barely noticeable obstacle 10х10х1.4m is designed to provide effective obstruction of movement and hinder the advancement of state border violators. It helps to create favorable conditions for blocking and detention of offenders by border patrols and reserves, as well as restricts the impact of animals and people on signaling and control equipment.
These products are available for purchase with a floor space of 100 m² and a set weight of up to 24 kg Safe and Effective Functionality
Specification Size List of Low Visible Wire:
The wire ring connection will form a four-layer space grid with a
height of 1.4 meters, a length of 10 meters and a width of 10
meters. The kit consists of 40 connecting rings with a diameter of
0.8 mm annealing wire manufactured as standard GOST 3282-74 and 40
metal posts (25 cm long). The folding size is 1.2 x 0.6K 0.12m. Package&Shipping Package:
Package Protection: a) Oil Protection: First step need to spray oil on the surface of Low Visible Wire Mesh. b) Water Proof Paper: Second to use water proof paper to protect it c) Shrink Film: Finally use shrink film to fasten it.
Accessories of Low Visible Wire Mesh: a) rings b) pegs = 9 peg or 7 peg
Workshop Show: Following Picture is our No.1 workshop, with around 100 pcs production platform, can produce around 500 sets per day.
Installation Instruction: Step-by-step instructions for installing a Low Visible Obstacle (LVO)
a): Place the coil in the right place Where it will be installed. Important note: after deployment, the MZP is no longer assembled into the original coil. That is, it is necessary to take into account that it will no longer be possible to install it, and then assemble it back and move it to another place.
b): Divide the bay into two parts and lay them out in two directions. No need to cut anything.
c): Stretch two rows of the bay to their full length. d) Lay each row outwards. Two rows will make four. e): To fix the coil with nails, you need to fix it with a thick coil with nails. By this move and stretch the bottom it will shows thick lines, thin lines will extend upward,after fix the outermost layer of coils.
|
||||||||
Product Tags: Engineering Obstacles Anti-tank Wire Net KN Anti-tank Wire Net Anti-tank Wire Net |
![]() |
Ukrain Tank Winding Wire Mesh for High-Security Applications and Critical Security Needs Guaranteed |
![]() |
Putanka Wire MZP Barrier Tank Barrier Low Visibility Obstacle Mesh Barrier Fence The Ultimate Choice For Unseen Security |
![]() |
Putanka Mesh Low Visibility Wire Barrier For Military And Critical Infrastructure Zones |
![]() |
MZP Type Kn Anti tank Wire Net Low Visibility Tank Trap For Various Terrains Vehicle Immobilization Defense Barrier |
![]() |
26-30kg MZP Low Visibility Metal Wire Anti Tank Barrier Putanka Mesh With 10*10**1.1-1.4m For Covert Military Applications |
![]() |
The Ukrainian Battlefield Anti Tank Wire Essential Defense System |