Low Visibility Galvanized Weave Wire Obstacle Anti-tank Barriers Wire Net Trap Netting

Low-visibility Galvanized Weave Wire Obstacle Anti-tank Barriers Wire Net Trap Netting

 
Recently, our factory produced a new type of steel wire mesh named " Anti Tank Barrier", from its name, we know its usage to stop tank moving during war. How it works, please see the following information, and contact us.
 
Inconspicuous obstacle (inconspicuous wire net, MZP, MZP putanka, putanka ) - a three-dimensional barrier made of carbon wire rings. The wire is very thin, so it is almost invisible. Refers to engineering non-explosive containment barriers.
 
 
Classification:
Wave type wire mesh, 10 meters long, 10 meters wide, 1.4m high, suitable for laying on the ground or grass.
Wheel-shaped wire mesh, with 10 to 20 coil into a cylindrical wire mesh piled up, with a stronger stability and protection.
 
The Quanlity certificate
 
our factory had been verified on site by world-leading inspection company SGS Group.
Our products are strictly follow ISO9001,SGS,CE certificate.
our product comply with BS EN 10244-2:2009 & BS EN 1208-2:2012
 

 

 
Production process
 
Secure the start of the 0.9 mm wire to one of the tubes at the start of a row.Lay a row of ramps in the correct direction, then return in the opposite direction following the pattern of laying the ramps to close the row of ramps.

 
Installation
 
Secure the start of the 0.9 mm wire to one of the tubes at the start of a row.Lay a row of ramps in the correct direction, then return in the opposite direction following the pattern of laying the ramps to close the row of ramps. Rewind the start of the wire secured to the tube (secured by winding) onto the last turn of the closed ramp. Do not cut the wire at the end of the row! Each row is braided with a single wire along all 20 layers!
 
1.Stretch two rows of coils to their full length