Stranding Wire Cable Laying Up Machine With 1000mm Drum
1. Usage
The machine is used for stranding or armouring all kinds of
different crosslinking cable,power cable,control cable and charging
pile cable production process.all the parts will be assembled
together after all the processing, which avoided the possible
defects caused by the processing after assembling. so a more
accurate and reliable operation. Higher speed, lower noise and more
reliable quality.
2. Features
2.1.Tension control of the take-up can be set changed and displayed on
the touch panel.
2.2.The machine is provided with back-twist, electric pre-twist, bobbin
is clamped and released by electromotion.
2.3. Highly productive lay up process with low energy consumption.
2.4. Most advanced emergency stop device.
2.5. Suitable for power cables and high compacted cross linking
cables.
2.6. Easy operation touch screen and PLC system.
3. Technical parameters
| Model (Laying-up Machine) | CLY630/3+3 | CLY-800/3+3 | CLY -1000/3+1+1 | CLY -1250/3+1+1 | CLY -1600/3+1+1 |
| Diameter of single wire | φ5-10 mm | φ5-12 mm | φ8-20mm | φ8-25 mm | φ10-35 mm |
| Maximum stranded conductor OD | φ30 mm | φ40 mm | φ63 mm | φ70 mm | φ80 mm |
| Stranding Pitch | 50-800 mm | 95-1500 mm | 200-2000 mm | 420-3500 mm | 550-5176 mm |
| Capstan | Capstan Wheel Diameter | 1000 mm | 1200 mm | 1800 mm | 2000 mm | 2500 mm |
| Maximum Haul-off Force | 10 T | 12 T | 15 T | 20 T | 25 T |
| Motor Power | 18.5 KW | 22 KW | 30 KW | 37 KW | 55 KW |
| Bobbin Size | 630 mm | 800 mm | 1000 mm | 1250 mm | 1600 mm |
| Take-up Bobbin | 1600 mm | 1800 mm | 2000 mm | 2500 mm | 3150 mm |
| Maximum Haul-off Linear Speed | 60 m/min | 60 m/min | 34 m/min | 28 m/min | 21 m/min |
| Central Height | 1000 mm | 1000 mm | 1000 mm | 1000 mm | 1000 mm |
4. Photo
5. Packing photo
6. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual
output value is over 10 million dollars at present,and has
developed into one of the most important Stranding Machine
Manufacturer in China.
