Steel Wire Rope Tubular Stranding /Cable Making Machine With
Pneumatic Brake
1. Application
The tubular stranding machine is used for copper wire, aluminum
wire and insulated cable core,with back twist, for 1+6 Bobbin, 1+12
Bobbin copper / aluminium round & compact conductors and steel
wire stranding.
The production speed is extremely fast. For example, JGG/1+6
Tubular Stranding Machine, 45mm² bare wires, pitch 105mm, the speed
is 2500m/h. So, in 12 hours, the skip stranding machine can produce
30000m wires. If we reduce the loading and unloading time, and host
stop-time, for example 3 hours, 20000 meters conductor can be
produced. Production capacity is very high.
2. Feature
2.1 We customise this tubular type stranding machine in accordance
with customers' requirements.
2.2 The stranding machine is designed with 1+6 Bobbin, 1+12
Bobbin, 1+18 Bobbin, Cage or accoding to customers' requirements.
2.3 Tubular stranding machine, Cages supported on good bearing on
both ends. The big main bearing is pump-oil forced lubrication
bearing.
2.4 The tubular cage is annealed, which will reduce the internal
stress and increase service life.
3. Technical parameters
Model (Tubular Stranding Machine) | JGG-400 | JGG-500 | JGG-630 |
Diameter of single wire | Copper | φ1.2-2.6 mm | φ1.4-4 mm | φ2-7 mm |
Aluminum | φ1.8-2.6 mm | φ1.8-4 mm | φ2-7 mm |
Maximum stranded conductor OD | φ7 mm | φ10 mm | φ12 mm |
Stranding Pitch | 6 Bobbin Stranding Cage | 37-281 mm | 44-338 mm | 82-620 mm |
12 Bobbin Stranding Cage | 37-281 mm | 44-338 mm | 82-620 mm |
18 Bobbin Stranding Cage | 44-334 mm | 44-338 mm | 82-620 mm |
Rotating Speed | 6 Bobbin Stranding Cage | 600 r/min | 600 r/min | 400 r/min |
12 Bobbin Stranding Cage | 600 r/min | 500 r/min | 300 r/min |
18 Bobbin Stranding Cage | 450 r/min | 400 r/min | 230 r/min |
Capstan | Capstan Wheel Diameter | φ600 mm | φ800 mm | φ1000 mm |
Maximum Haul-off Force | 3T | 5T | 5T |
Motor Power | 22 KW | 30 KW | 37 KW |
Bobbin Size | 400 mm | 500 mm | 630 mm |
Center Payoff Bobbin | 400 mm | 500 mm | 630 mm |
Take-up Bobbin | 1250 mm | 1600 mm | 2000 mm |
4. Photo
5. Packing photo
6. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual
output value is over 10 million dollars at present,and has
developed into one of the most important Stranding Machine
Manufacturer in China.