The machine is of gantry traversing type with upper-mounted
casing-pipe. The gantry frame is made by bending and welding. The
two tail-centers of wire reel are moved up/down by feed screw nut
driven by two motors via cycloid speed reducer. Each tail-block can
move by itself, or the center-blocks can move simultaneously.
Double protective device is also equipped. When necessary, it can
also be equipped with tail spindles for wire reels with various
specifications. The clamping of wire reel is realized by the motor
driving the reducer with overload protection. The take up motor
adopt 5.5kw AC variable frequency motor, which drives the main
shaft of the reel to rotate through the gearbox. The take-up motor
is controlled by Siemens G120 series controller, and the traverse
is driven by 0.75KW Mitsubishi servo motor and Mitsubishi servo
controller; The cable pitch is set through the touch screen, and
the size and tension of the cable pitch can be set at any time; The
whole machine is equipped with speed, tension and pitch adjustment;
Take up forward and reverse inching buttons are set, and tension
display and pitch display are set. Tension control of take-up is
realized by torque or speed. Siemens PLC S7-200 is used to manage
the whole machine, providing the connection channel and relevant
signals with the main control system.
2. Technical Parameter
Take up bobbin | Width of bobbin | Max diameter of the cable | Take up speed | Loading weight |
PN630-1250 | 400~950mm | Φ20mm | 120m/min | 2T(max) |
PN800-1600 | 600-1180mm | Φ40mm | 100m/min | 4T(Max) |
PN1000-PN2000 | 750~1500mm | Φ60mm | 80m/min | 8T(max) |
PN1250-PN2500 | 950~1900mm | Φ80 | 80m/min | 12T(max) |
PN1600-PN3150 | 1180~2300mm | Φ120mm | 50m/min | 18T(max) |
3. Photos