Electric Cable Rewinding Machine For Spark Detection / Steel Tape Armoring
|
Electric Cable Rewinding Machine For Spark Detection / Steel Tape Armoring
1. Processing technology The big bending machine is used to bend the steel plate to the frame structure. Four frame structures share the circle equally, and they are welded together with the big discs on the both sides. Also all the structures are welded to the center thick wall tube. The whole structure is strong and beautiful.
After the welding process is completed, the entire structure is annealed in an annealing furnace to eliminate internal stresses.
Then the whole structure will be machined on the big horizontal lathe. This horizontal lathe is big enough to machine every part in one step, without changing one end to the other. This process will keep the concentricity of the whole structure, prolong the service life of bearings on the both ends.
The deep hole drilling and boring machine can turn the installed holes for the clamping devices. The holes for one pair of clamping devices are turned in one step, which keeps the both holes in the same concentricity. The concentricity will reduce the wire-break rate and prolong the bearing for the clamping device.
This double column vertical lathe is used to turn the big disc for cradle type laying-up machine and the capstan of the stranding machine. This machine can turn and burnish the grooves to protect the cable and keep the same hual-off force.
Large planer type milling machine, which is used to mill the main chassis of the main stranding cage and take-up & pay-off chassis. The large planer type milling machine can ensure that each flat surfaces are machined in one time to keep the homogeneous height distribution of the surface machined by the milling machine. All of these will enable the whole machine runs smoothly.
Dynamic balancing machine is the key production equipment of fast running wire and cable equipment, especially rigid frame wire cage and tubular wire cage. The processing process of the wire cage will produce different eccentric force, which can be detected by the dynamic balancer. After correction, the wire cage will easily meet the requirements of high-speed rotation, and increase the service life.
Electric annealing furnace is an essential equipment for producing wire and cable machine, especially rigid frame strander and tubular strander. When the main stranded cage is welded together, the internal stress is great. The internal stress is strongly released by heat treatment. This production process will ensure that the strand cage does not deform and break, thus improving internal quality.
2. Photos
3. Our factory and introduction Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.
|
Product Tags: automatic rewinding machine cable spooling machine |
![]() |
Copper Tape Rewinding Machine PLC Controlled Dispatch 2500mm Drum |
![]() |
Welding Wire Rewinding Machine / Copper Cable Auto Rewinding Machine |
![]() |
Wire Cable Automatic Rewinding Machine High Speed Long Working Life |
![]() |
Automatic Wire Cable Spooling Machine For Electric Spark Detection |
![]() |
High Speed Auto Cable Rewinding Machine , 630 Type Cable Coiling Machine |
![]() |
Electric Cable Rewinding Machine For Spark Detection / Steel Tape Armoring |