Reliable Planetary Stranding Machine With Anti Twist Device Low
Noise
1.Usage
The machine is used for stranding Cu, Al wire, ACSR and insulated
wires with back-twist. It also can steel-armoring or Cu-screening
cables.
2. Main Character
2.1. Back-twist method: Sun & planetary gear mechanism.
2.2. The non-axle thimble twisting cage is equipped with mechanism
friction tension control.
2.3.The drive shaft connects all the parts of the machine together to
maintain a stable stranding pitch, and frequency synchronization
can also be selected to control the machine.
2.4. The machine is widely used, and manipulated conveniently with
low-noise.
3. Configuration
Pay-off, mainframes of 6-reel section, 12-reelbsection, 18-reel,
24-reel and 30-reel, die holder, tape lapper, armor unit, haul-off,
take-off, driven system and electrical system.
4.Technical parameters
Model (Planetary Stranding Machine) | JLY-315 | JLY-400 | JLY-500 | JLY-630 |
Diameter of single wire | Copper | φ1-1.6 mm | φ1-4 mm | φ1.2-5 mm | φ1.5-5 mm |
Aluminum | φ1.2-2 mm | φ1.2-4 mm | φ1.4-5 mm | φ2.0-5 mm |
Maximum stranded conductor OD | φ14 mm | φ28 mm | φ35 mm | φ45 mm |
Stranding Pitch | 6 Bobbin Stranding Cage | 26-435 | 39-695 | 44-770 | 48-840 |
12 Bobbin Stranding Cage | 30-526 | 43-774 | 47-858 | 50-928 |
18 Bobbin Stranding Cage | 34-639 | 47-858 | 55-1001 | 65-1201 |
24 Bobbin Stranding Cage | 38-749 | 51-940 | 63-1151 | 75-1601 |
Rotate Speed | 6 Bobbin Stranding Cage | 218 r/min | 120 r/min | 106 r/min | 55 r/min |
12 Bobbin Stranding Cage | 118 r/min | 110 r/min | 97.5 r/min | 45 r/min |
18 Bobbin Stranding Cage | 108 r/min | 100 r/min | 82.9 r/min | 35 r/min |
24 Bobbin Stranding Cage | 98 r/min | 90 r/min | 74 r/min | 25 r/min |
Capstan | Capstan Wheel Diameter | 1000 mm | 1600 mm | 1800 mm | 2000 mm |
Maximum Haul-off Force | 2T | 5T | 10T | 15T |
Motor Power | 18.5 KW | 22 KW | 37 KW | 55 KW |
Bobbins | 315 mm | 400 mm | 500 mm | 630 mm |
Center Pay-off Bobbin | 315 mm | 1250 mm | 1600 mm | 1600 mm |
5. Photos
6. Packing photo
7. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, Baohong Electrical Machinery has been relying on the
care and support of customers, committed to the research and
development of stranding machine and laying-up machine, and has
made great progress. Now, we have become the only assembly line processing factory in
China that can develop and produce JLK rigid strander series. We
have also independently developed JGB bow skip strander line, CGB
Bow skip cable wiring line and CLY high speed cradle cable laying
line.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual
output value is over 10 million dollars at present,and has
developed into one of the most important Stranding Machine
Manufacturer in China.