Rigid Planetary Stranding Machine For Al Wire ACSR And Insulated
Wires
1. Usage
The machine is used for stranding Cu, Al wire, ACSR and insulated
wires with back-twist. It also can steel-armoring or Cu-screening
cables.
2. Main Character
2.1. Back-twist method: Sun & planetary gear mechanism.
2.2. The non-axle thimble twisting cage is equipped with mechanism
friction tension control.
2.3. The transmission shafts link all the machine parts
together to keep stable stranding pitch, which can also be chosen
frequency synchronization to control the machine.
2.4. The machine is widely used, and manipulated conveniently with
low-noise.
3. Configuration
Pay-off, mainframes of 6-reel section, 12-reelbsection, 18-reel,
24-reel and 30-reel, die holder, tape lapper, armor unit, haul-off,
take-off, driven system and electrical system.
4. Technical parameters
Model (Planetary Stranding Machine) | JLY-315 | JLY-400 | JLY-500 | JLY-630 |
Diameter of single wire | Copper | φ1-1.6 mm | φ1-4 mm | φ1.2-5 mm | φ1.5-5 mm |
Aluminum | φ1.2-2 mm | φ1.2-4 mm | φ1.4-5 mm | φ2.0-5 mm |
Maximum stranded conductor OD | φ14 mm | φ28 mm | φ35 mm | φ45 mm |
Stranding Pitch | 6 Bobbin Stranding Cage | 26-435 | 39-695 | 44-770 | 48-840 |
12 Bobbin Stranding Cage | 30-526 | 43-774 | 47-858 | 50-928 |
18 Bobbin Stranding Cage | 34-639 | 47-858 | 55-1001 | 65-1201 |
24 Bobbin Stranding Cage | 38-749 | 51-940 | 63-1151 | 75-1601 |
Rotating Speed | 6 Bobbin Stranding Cage | 218 r/min | 120 r/min | 106 r/min | 55 r/min |
12 Bobbin Stranding Cage | 118 r/min | 110 r/min | 97.5 r/min | 45 r/min |
18 Bobbin Stranding Cage | 108 r/min | 100 r/min | 82.9 r/min | 35 r/min |
24 Bobbin Stranding Cage | 98 r/min | 90 r/min | 74 r/min | 25 r/min |
Capstan | Capstan Wheel Diameter | 1000 mm | 1600 mm | 1800 mm | 2000 mm |
Maximum Haul-off Force | 2T | 5T | 10T | 15T |
Motor Power | 18.5 KW | 22 KW | 37 KW | 55 KW |
Bobbin Size | 315 mm | 400 mm | 500 mm | 630 mm |
Center Payoff Bobbin | 315 mm | 1250 mm | 1600 mm | 1600 mm |
Take-up Bobbin | 1250 mm | 2000 mm | 2000 mm | 2500 mm |
5. Photos
6. Our factory and introductions
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Located in Hejian Economic Development Zone, Hebei Province, our
company is the largest professional manufacturer of stranding
machine and laying-up machine in North China.
Since 2006, Baohong Electrical Machinery has been relying on the
care and support of customers, committed to the research and
development of stranding machine and laying-up machine, and has
made great progress. Now, we have become the only assembly line processing factory in
China that can develop and produce JLK rigid stranding series. We
have also independently developed JGB bow skip stranding line, CGB
Bow skip cable wiring line and CLY high speed cradle cable laying
-up line.
Now, Hejian Baohong Electrical Machinery Co., LTD., covers an area
of 10,000 square meters, production workshop of 8,000 square
meters. Our company has 60 employees, including 10 R&D staff. With an annual output of more than 10 million US dollars, the
company has developed into one of the most important stranding
manufacturers in China.