Sun Gear Planetary Stranding Machine , Powerful Core Laying Machine
1. Usage
The machine is used for stranding Cu, Al wire, ACSR and insulated
wires with back-twist. It also can steel-armoring or Cu-screening
cables.
2. Main Character
2.1. There are 2 method for back-twist: planetary mechanism.
2.2. The non-axle thimble twisting cage is equipped with mechanism
friction tension control.
2.3. The transmission shaft connects the various components of the
machine together to maintain a stable twist pitch, or frequency
synchronization can be selected to control the machine.
2.4. This machine has a wide range of uses, convenient operation, and
low noise.
3. Configuration
Pay-off, mainframes of 6-reel, 12-reel, 18-reel, 24-reel and
30-reel, die holder, tape lapper, armor unit, haul-off, take-off,
driven system and electrical system.
4. Technical parameters
| Model (Planetary Stranding Machine) | JLY-315 | JLY-400 | JLY-500 | JLY-630 |
| Diameter of single wire | Copper | φ1-1.6 mm | φ1-4 mm | φ1.2-5 mm | φ1.5-5 mm |
| Aluminum | φ1.2-2 mm | φ1.2-4 mm | φ1.4-5 mm | φ2.0-5 mm |
| Maximum stranded conductor OD | φ14 mm | φ28 mm | φ35 mm | φ45 mm |
| Stranding Pitch | 6 Bobbin Stranding Cage | 26-435 | 39-695 | 44-770 | 48-840 |
| 12 Bobbin Stranding Cage | 30-526 | 43-774 | 47-858 | 50-928 |
| 18 Bobbin Stranding Cage | 34-639 | 47-858 | 55-1001 | 65-1201 |
| 24 Bobbin Stranding Cage | 38-749 | 51-940 | 63-1151 | 75-1601 |
| Rotating Speed | 6 Bobbin Stranding Cage | 218 r/min | 120 r/min | 106 r/min | 55 r/min |
| 12 Bobbin Stranding Cage | 118 r/min | 110 r/min | 97.5 r/min | 45 r/min |
| 18 Bobbin Stranding Cage | 108 r/min | 100 r/min | 82.9 r/min | 35 r/min |
| 24 Bobbin Stranding Cage | 98 r/min | 90 r/min | 74 r/min | 25 r/min |
| Capstan | Capstan Wheel Diameter | 1000 mm | 1600 mm | 1800 mm | 2000 mm |
| Maximum Haul-off Force | 2T | 5T | 10T | 15T |
| Motor Power | 18.5 KW | 22 KW | 37 KW | 55 KW |
| Bobbins | 315 mm | 400 mm | 500 mm | 630 mm |
| Center Pay-off Bobbin | 315 mm | 1250 mm | 1600 mm | 1600 mm |
5. Photos
6. Packing photo
7. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual
output value is over 10 million dollars at present,and has
developed into one of the most important Stranding Machine
Manufacturer in China.
