Servo Motor Stator Testing Machine 3KV 6s Test Time Multifunctional

 
Servo Motor Stator Testing Machine / Multifunctional Stator Tester
 
 
1. Technical specification

 
 2. DUT introduction
2.1 Test object: servo motor stator
2.2 Test items: insulation resistance, winding resistance, surge, Hipot and inductance
 

 
3. Product features
3.1 Available selected motor model ≥1000.
3.2 The operator can select test items as required.
3.3 The parameters range for each type of motor can be entered and saved. The resistance test has the function of setting and displaying the unbalanced degree.
3.4 Continue to test or stop the test can be selected if the stator fails the test.
3.5 Statistic data: record the testing data and save the testing system.
 
4. Test Process
4.1 Select the program before starting to test. (It is only necessary when testing a new type of stator for the first time.)
4.2 Put the stator on the designated station and connect the wire
4.3 Slide the cover to start the test, and in-test status will be displayed.
4.4 The stator is tested automatically, and the operator is not allowed to touch the stator during the test.
4.5 After testing the stator, OK or NG signal will be shown.
4.6 Continue to test next stator as the above steps.