Small Rubber Track for Robot with Customized Drive Sprockets /Pulleys

 
Product information
 
Size: 123mm width x38mm pitch x 47 links ( link can be customized )
 
Total length: pitch (38)x links (47)=1786mm
 
Weight: 3.35kg (we can use special material which can extend the life of  rubber track)
 
Warranty: 12 month guarantee for normal usage
 

 
More picture
 

 
Application
 

 
Installation of the Rubber Tracks
 
A. Too small strength: Easily causes jumping teeth, riding a tooth or steering failure of the guide wheels and supporting wheels and leads to track derailment or escapes.
B. Too large strength: Track wire will be deformed at the elongation by the excessive strain tensile, which will make the pitch changed, and track core iron and the drive wheels abnormally worn, also will make teeth touched and the track broken, the machine power loss larger, track wear exacerbated, belt crack easier as well as the track life shorter. After the track is strained, the maximum sag distance is 10-15mm, just as the pitch below.
 

 
 Attention
 

In order to extend the life of rubber tracks, please complete the following work:
A. Never turn urgently on the concrete floor, gravel road, or hard and sharp road, in order to avoid speeding up the wearing, twisting and chapping of the rubber track.
B. Try not to work in the rotten field, to avoid rubber track skid and wear.
C. When the stones or other objects come into the crawler and chassis, stop immediately, and clear gravels or obstacles.
 

 
 Warns
 

A. Do not travel on the road full of footstone, spinous-stone, scrap iron and other objects.
B. Do not drive in the rivers, streams and on the seacast or any rugged road.
C. Do not make the track unilaterial landing.
D. Forbid aggressive driving.
E. Avoid making a turn rapidly, please slow down and make a turn gradually.
 

 
Parameters