Black Rubber Track Chassis , Small Harvester Tracked Undercarriage Systems

Abbreviated Rubber Track Undercarriage for Carrying Machine Use (997mm Length)

Product Information:

Undercarriage / rubber track chassis -DP-TR-148

Main Parts:Rubber track;construction frame;tensioning screw,drive wheel/sprocket; support wheels,and idler,etc.

Material:Steel,Aluminum alloy,rubber

It can be used for Children Driving Robot, Fire Equipments with the water monitor , Stair Climbing chassis and so on .  And if you need , we can also supply the motor and reducor for you . The color can be customize as your requirements . Controller and remote control also available.

Description of the rubber track undercarriage

1. Easy for vehicles to run on hill land, mud road, sand ground...

2. Warranty: 12 months

3. Application: All terrain/season;

4. Wide used on snow blower,paver,dumper,mini excavator,small harvester,anti-fire robot,raw mower,and other small or mid size machine design.

Their choice of operating environment and notice are as follows

(1) sharp edge (such as steel, stone, etc.) of the road will cause damage to the rubber track.

(2) chemical, oil, sea salt will accelerate the aging track, after use in such an environment, need to clean track.

(3) rubber track,temperature is generally between -25 ~ + 55'C.

(4) the curb of the road, rutted or uneven pavement can cause side edge of the ground track pattern to be cracked, but the rubber track can be used continuously if the inside steel cord has no injuries.

(5)gravel, gravel road will result in abrasion earlier where the idlers connect with the rubber track, and formation of small cracks. Serious water ingress, causing iron core loss, wire breakage.

You can send us message with your size requirement for the undercarriage, as the size can be customized,so below points we should know from you

1.Max loaded weight and what kind of machine to fit is necessary to determine the rubber track type

2.The entire size of the rubber track undercarriage,like the Width,Length,Height is also very important for us to make a recommendation for you.

3.The undercarriage in the ads,please have a reference,if you like,we can adjust the size for you.Special customized size is also acceptable.

Our company mainly produce Rubber Tracks in China. With Rubber Factory in Shanghai we are strong in offering various of Rubber Tracks for: Crawler, Bulldozer, Excvavtor, Asphalt Paver, (Mini)Harvester, Snowblower, Snowmobile, Wheelchair, Robot...etc.
Yanmar, Terex, Kubota,BridgestoneRubber Tracks... OEM are available.

Spec in the ads

NOTICE:IF THIS SIZE DO NOT FIT YOUR NEED,PLEASE MESSAGE US WITH YOUR REQUIREMENT,WE WILL MAKE A RECOMMENDATION FOR YOU AMONG OTHER SIZE.

MORE PICTUES FOR DP-TR-148

Paking

The DP-TR-148 rubber track undercarriage in the ads is packing in a carton.

Normally packing in cartons,as the cross tube often design as bolted,so we can take apart and packing in the carton. But for welded cross tube and larger rubber track undercarriage, we will pack the undercarriage on pallet.