Durable Diamond Polishing Pads , High Efficiency Diamond Terrazzo Polishing Pads

Resin-Copper Bond diamond Polishing Pads for Terrazzo/Concrete / Engineered Stone / Porcelain / Quartz

resin-copper bond polishing pads,  With high diamond concentration and copper inside, the serial pads, never use Sic as additive, with aggressive and tenaciously, better heat transmissibility performance, can be used both by dry or by wet. They are designed for a variety of applications and can be used in the fabrication shop and at the jobsite. They are with the capability for a high glossy degree.

Guides For Using:

1. Ware an apron, a gauze mask and safety glasses first. Connect a Back Holder to the Polisher or Angle Grinder, and attach a Wet Pad of grit 50 to the Back Holder. Set the speed at 3,000-4,000RPM and start polishing process.

2. Moving two passes across and one pass up and down is a good technique. Make sure all prior scratches are removed before moving onto the next grit.Repeat the same process using all 7 pads to complete the polishing process.Polish from grit 50 to grit 3000 respectively. Do not skip.

3. If you want to achieve the best polishing results on granite or other natural stones, use Buff Pad as the last step. Wet the workpiece and run the Buff Pad semi-wet with very low water. When the water is consumed, the process is complete. Repeat as necessary to improve the luster and achieve the mirror effect result.

4. Dry pads are designed for use on jobs without using water, but polishing with a small amount of water to wet the object surface will ultimately reach a better result.