Hot Melt PSA Glue Adhesive With Good Tack For Making Gum Paper Sheet

APPLICATION INSTRUCTIONS

Its adhesion performance will be affected by substrates, release paper and application environment, so trial run is necessary to determine whether the adhesive is suitable.

There should be no dust or oil on the surface of substrates and release paper, also the substrates and release paper should be treated to constant temperature and humidity before application.

Application methods: roller or spray
Operating temperature: the 150-170℃, is recommended in the glue viscosity can be adjusted by the temperature of summer appropriate Down 5-10 ℃, raised 5-10 ℃ in winter. Application-temperature of the labels between +5°C and 50°C,Temperature resistance of the applied label from -20°C to +60°C
 

PACKAGING AND STORAGE

Shelf Life: 24 Months in dry and cool environment
Packaging: 25kg/Box

CLEANING

The residual adhesive can be rubbed off by wooden shovel before it is totally cooled.
Cooled glue can be cleaned with specialized detergent. Applicators can be cleaned with mineral oil at 120℃, then purged with hot melt adhesive.

WARNINGS

Don’t mix the product with other adhesives.
Keep the adhesive containers covered to avoid dust or contamination.
Stop heating if you don’t use it for a long time to avoid the carbonization of the adhesive.
Wear safety glasses, safety gloves and safety clothes when using hot melt adhesive to avoid scald.