6.5 Inch OBD2 Race Car Dashboard LCD Digital Race Dash Display DO903

6.5 Inch OBD2 Race Car Dashboard LCD Digital Race Dash Display ( DO903 )

A .LED

    Four LED light is on each top side of the frame and will light according to the different RPM. The light         color is GREEN, GREEN, YELLOW, RED from bottom to top.

B .UP SELECT KEY

     choose and adjust the number value

C .DOWN SELECT KEY

     choose and adjust the number value

D .MENU KEY

     set up MENU and confirm functions

E .EXIT KEY

    exit or cancel the setting.

F. POWER PLUG

    There are two power plugs on the display, one is on the left,the other is on the right. You can connect        Mini USB to either plug. (NOTE: PLEASE USE SPECIAL POWER CABLE IN DO903DASHBOARD KIT.          OTHER STANDARD MINIUSB IS NOT SUITABLE FOE THE DASHBOARD. IF USE, WILL DAMAGE THE        DASHBOARD)

DISPLAY :

  1 Engine RPM

  2 Speed

  3 Fuel Level Input (%)

  4 Absolute Throttle Position(%)

  5 Calculate Load Value (%)

  6 Coolant Temp0erature (℃)

  7 Voltage (V)

  8 Time

  9 Bottom Display

1.DO903 OBD dashboard contains a display and a bluetooth OBD unit. Please connect bluetooth OBD module to the car OBD plug and connect the power cable of display to car power outlet.

2.There are two power plugs on the display, one is on the left, the other is on the right. You can connect Mini USB to either plug. (NOTE:PLEASE USE SPECIAL POWER CABLE IN DO903 DASHBOARD KIT. OTHER STANDARD MINIUSB IS NOT SUITABLE FOE THE DASHBOARD. IF USE, WILL DAMAGE THE DASHBOARD)

3.Two keys are located each side of the dashboard display. “ MENU/OK” key is on the left top to set up MENU and confirm functions.“EXIT/CANCEL” key is on the left bottom to exit or cancel the setting. “UP ”,“ DOWN”keys are on the right top and right bottom to choose and adjust the number value.

4.Light sensor is on the middle of the dashboard. The display screen background changes in four levels based on the natural light. Four LED light is on each top side of the frame and will light according to the different RPM. The light color is GREEN, GREEN, YELLOW, RED from bottom to top.Make sure to connect OBD module with car OBD plug then start the car. When get power , the display will search for OBD signal and connect it automaticly.

DO903 Suit For All Automatic Diagnostic System OBD2 Stands.