Educational Equipment Technical Teaching Equipment Variable slope channel

H12 Educational Equipment Technical Teaching EquipmentVariable slope channel

• The hydraulic channel EH1000 is a channel with variable slope, and its transparent side walls allow to visualize the flow of the vein.

  Educational goals:

  Evidence of different flows: uniform, permanent, gradually or abruptly varied.

  Identification of different flow: torrential, critical, fluvial

  Distribution of speeds in a channel

  Chezy, Bazin, Manning-Stricklel Formulas

  Flows above different types of thresholds: thin, thick rim, triangular weir.

  Flow measurements in a critical section

  Torrential - fluvial: the hydraulic jump

  Studies of eddy curves

  Flow through a Venturi and / or Parshall Flume

  Influence of roughness on a flow

  Technical description:

  The design and design of the EH1000 gives the properties of a uniform channel, ie the rigorous respect of the oven. The length-to-width ratio of the EH1000 classifies it as long. The water circulates in closed circuit.

   

  The EH1000 channel is made of Plexiglas.

  Of uniform roughness, it is assembled by a special assembly which ensures parallel walls and a constant section.

  The perfect rigidity of the channel is ensured by a Plexiglas box beam. At its endstream, it is based on a manual screw jack that allows a fine adjustment of positive or negative slopes. The water is pumped from the main tank and fed into the canal itself, via a "duckbill" valve, located upstream of the test vein.

  The valve "duckbill" makes turbulence, turbulence, vortices and excessive disturbances.

  The flow is regulated by a multi-turn manual valve and is measured by an electromagnetic needle flow meter.

  The end of the canal ends with a spilling ceiling with a guillotine valve from which the water falls back into the main tank. Due to its configuration, this spillway is still unclogged and provides an essential hydraulic break at the exit of the channel.

   

  The bench consists of:

   

  1 kW stainless steel centrifugal pump

  Water tank

  Magnetic float needle type flow meter.

  2 vernier gauges. 1 pitot tube

  1 thin-walled weir with ventilated ply, 2 thick weirs, 1 venturi, 1 vertical guillotine valve, 2 bridge piers, 1 triangular weir and 1 rough bed

  optionsLprice didn’t include, if you need, must pay extra price for it)

  Parshall Canal, siphon, radial sector valve, inclined sill, weir and ski jump, weir and weir.

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.