Vocational School Refrigeration Training Equipment With Simple Compression Circuit

ZM6145 Vocational School Refrigeration Training Equipment With Simple Compression Circuit

1. Overview

* Introduction to refrigeration1
* Model of a compression refrigeration system / heat pump1
* Cooling and heating of the heat exchangers directly tangible

2. Technical Description

The purpose of a refrigeration system is the cooling of materials and products, e.g. to protect food from spoiling. Cooling can be described as a process in which heat is removed from the environment.
A commonly used refrigeration system is the so-called compression refrigeration system.

In this system refrigerant flows through four main elements: compressor, condenser, expansion element and evaporator.
The refrigeration system uses the fact that the refrigerant has a low boiling point at low pressure. This means that evaporation takes place on the low pressure side. During the evaporation of the refrigerant heat is removed from the environment and it is cooled.

The condensation takes place on the high pressure side after the evaporator. Here the heat is discharged into the environment. If not the cooling effect but the discharged heat is used, this is called a heat pump.
The set-up of a simple compression refrigeration system.

Evaporator and condenser have been designed as a pipe coil with each end immersed in a water-filled tank. The water simulates the environment.

A thermostatic expansion valve serves as expansion element. Two manometers indicate the two system pressures on the high and low pressure sides. On an additional scale on the manometer the evaporation temperature of the refrigerant is indicated.

Two thermometers measure the temperature of the water in the tanks. This allows for calculations of the amount of heat removed from the environment (evaporator, cold water) and added to the environment (condenser, hot water).

A sight glass indicates the aggregate state of the refrigerant upstream of the expansion valve.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide
through the experiments.

3. Learning Objectives / Experiments

- fundamentals of a compression refrigeration circuit
- key components of a refrigeration system
* compressor, evaporator, condenser, expansion
element
- relationship between the pressure and boiling
point of a liquid
- operation of a refrigeration system / heat pump
- developing a basic understanding of the
thermodynamic cycle
- simple energy balance

4. Specification

[1] fundamentals of refrigeration in a simplified model
[2] typical compression refrigeration system with piston compressor, thermostatic expansion valve, evaporator and condenser (each in the shape of a pipe coil)
[3] 2 manometers with temperature scale for the refrigerant show the values of the refrigerant on the
high and low pressure sides
[4] 2 water-filled tanks with thermometer to demonstrate the cooling and heating effect
[5] pressure switch to protect the compressor
[6] sight glass to monitor the aggregate state of the refrigerant
[7] refrigerant R134a, CFC-free

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.