DX8308 Wire Static Flexure Tester For Rubber And Plastic Cable

DX8308 Wire Static Flexure Tester

Scope of application:

It is mainly suitable for testing the flexure test of rubber and plastic insulation and sheathed flexible cable under the dynamic load, and detects the following wire and cable faults and stops the machine in the test.

Standards:

Meet the requirements of static flexure test in GB/T5023.2-2008/IEC60227-2:2003 and GB/T5013.2-2008/IEC60245-2:1998; It meets the requirements of static flexure test in GB/T5013.5-2008 and GB/T5013.6-2008, and meets the requirements of 4.4.1 flexure test and 4.4.2 static flexure test in GB/T5023.6-2008.

IEC60245-1 Static Flexibility Tester For Checking Mechanical Strength Of Completed Flexible Cables

Parameters:

1. Specimen diameter Φ6-φ32mm (standard with two sets of fixtures)

2. The length of the sample is 3000mm, and the height from the ground ≥ 1500mm

3. The distance between the two fixtures (the distance between the two chucks meets the requirements of Table 4, Table 5 and GB/T5023.2-2008 in GB/T5013.21-2008 at the same time)

Static Flexure 1: 760-1700mm

Static Flexure 2: 200-1700mm

4. SPEED: 4M/S2 1500 times/H

5. Counting range: 0-999999

6. Motor power: 0.37kW

7. Dimensions: 2350*850*1700mm

8. Test current: 0.1A

9. Test voltage: 12V

10. The weight of the testing machine is about 300Kg

11. The number of cycles ≥ 3000000 times

12. Alarm and shutdown when the cable insulation core is broken.

Rationale:

Take the appropriate length of wire, fix it on the equipment, reciprocate the curved movement, when the curved rao to the core of the broken circuit, the machine will automatically alarm and stop.