IEC60851 Breakdown Voltage Tester
|
Detailed Product Description
|
Electrical Breakdown Voltage Tester For Enameled Wire Introduction of withstand voltage tester: It is suitable for enameled wire, electronic wire, PVC wire, etc.
in air medium, under a certain temperature, the power frequency
voltage (48 ~ 62Hz) of high voltage is raised at a specific speed
between the insulation layer and the conductor at a specific speed
until breakdown, so as to measure the breakdown voltage of the
tested object. It is applicable to the method of continuous and
uniform voltage rise or step-by-step voltage rise. The AC voltage
is applied to the sample until it breaks down. The breakdown
voltage value is measured and the breakdown strength of the sample
is calculated. The voltage is raised to the specified value by the
method of rapid voltage rise, and the sample does not break down
for a certain period of time. The specified value is set as the
withstand voltage value of the sample. Standard: IEC60851,IEC60950-U.2.1 Technical parameters:
1. Step up speed regulation: it is electric automatic speed regulation 2. Voltage measurement accuracy: ≤ 2% 3. Test method: AC test 4. Boost mode: automatic program control 5. Power frequency: 50 Hz sine wave |
||||||||||||||
| Product Tags: Enameled Wire Breakdown Voltage Tester IEC60851 Breakdown Voltage Tester IEC 60851 Wire Testing Equipment |
Related Products
|
Needle Flame Testing Machine Flame Tester For Components Parts And Assemblies Of Electrical |
|
High Current Arc Ignition Testing Equipment For Arc Resistance Test Of Electrical And Electronic Products |
|
UL1581 Combustion Testing Machine Vertical Horizontal Large Combustion Chamber |
|
Automotive Wire Cross Linking Testing Equipment For Thin Walled Low Voltage Cables For Automobiles |
|
DX8323 Low Temperature Wire Winding Device |
|
DX8052 Cold And Hot Impact Testing Machine |
Email to this supplier