IEC60587 6 KV Tracking Index Tester Plastic Testing Equipment

IEC60587 6 KV Automatic High Voltage Tracking Index Tester

Technical Description:

Smoke window cover (1),
Top plate of test box (2),
Tempered glass (3),
Door (4),
Chassis right panel (5),
Test box (6),
Test box bottom plate (7),
Kettle (8),
Handwheel (9),
Drawer door (10),
Voltage regulator (11),
Underframe (12),
Kettle box (13),
Electrical installation board (14),
Contaminated liquid box (15),
The right panel sealing plate of the chassis (16),
Wind cover (17),
Voltage regulator base (18),
The bottom of the box (19),
Back door (20),
High voltage resistance switch (21),
Capacitor (22),
High voltage switch (23),
Transformer (24),
Casters (25),
Track One (26),
Orbit Two (27),
Track Three (28),
Copper sheet (29),
Style rack (30),
Specimen assembly (31),
Water pump head seat (32),
Water pump head (33),

The water pump head base fixing plate (34) and the case (35) are characterized by:
A box bottom (19) is installed at the upper end of the chassis (12), a test box bottom plate (7) is installed at the top end of the box bottom (19), and a test box (6) is fixed at the top end of the test box bottom plate (7). ), a test box top plate (2) is fixed on the upper end of the test box (6), a door (4) is installed on the front end of the test box (6), and a chassis (35) is fixed on the right end of the test box (6) , The front end of the cabinet (35) is installed with a right cabinet (5), the top plate (2) of the test box is installed with a smoke window cover (1), and the front end of the door (4) is installed with tempered glass (3) A kettle box (13) and a kettle (8) are fixed at the right end of the bottom (19) of the box body, the kettle (8) is installed at the upper end of the kettle box (13), and the front end of the bottom (19) of the box body is fixed with The drawer door (10) and the voltage regulator (11), the drawer door (10) is located on the left side of the voltage regulator (11), a hand wheel (9) is installed on the voltage regulator (11), and the bottom A caster (25) is fixed at the lower end of the frame (12), an electrical installation plate (14) is installed on the front face of the chassis (35), the pollution liquid box (15) is located inside the test box (6), and the pollution liquid box (15) Located at the rear side of the door (4), the bottom of the box (19) is installed with a transformer (24) at the left end, the front of the bottom (19) is installed with a rear door (20), and the bottom of the box (19) is installed with a rear door (20). 19) High voltage resistance switch (21), capacitor (22), voltage regulator base (18) and high voltage switch (23) are installed inside. The capacitor (22) is located on the right side of the high voltage resistance switch (21). The switch (23) is located on the right side of the capacitor (22), the sample rack (30) is installed inside the test box (6), the left end of the sample rack (30) is installed with a rail one (26), the sample rack (30) 2) Rail two (27) is fixed at the front end, rail three (28) is installed at the lower end of the sample rack (30), copper sheet (29) is installed on the rear end of the rail two (27), the right end of the sample rack A sample assembly (31) is fixed, the sample rack is located above the contaminated liquid box (15), and the inner bottom of the chassis (35) is fixed with a water pump head seat (32), a water pump head (33) and a water pump head The fixing plate (34) of the water pump head is fixed at the bottom end of the inside of the cabinet (35). There are several water pump heads (33), and the several water pump heads (33) are equally spaced. Installed on the upper end surface of the water pump head base fixing plate (34).

Standard:

IEC60587-2007, ASTM D2303

Parameters:

Our Advantage:

1. ISO9001:2008 certification

2. Professional and rich experienced staff

3. Both standard and Non-standard service are provides

4. 95% products export to foreigner countries

5 .Best service after shipment with emails.