Wire Testing Equipment IEC60754-1 Electric Cables Halogen Acid Gas
Tester
Halogen gas release determination device
Application:
Suitable for the determination of total halogen gas content in low
and halogen free flame retardant cables and the determination of
gas acidity by measuring ph and conductivity.
Standards:
Iec60754‐1:1994,
Iec60754‐2:1991 standards
Ul2556‐ 9.10 of 2007 and 911
Equipment composition:
1. Tube furnace:The effective length of the heating chamber and the
diameter of the pipe is 600 x salvation 42mm, equipped with an
adjustable electrical heating system.Heating power:220v /10kw
2. Combustion tube:
Material:Refractory pipe made of silica, corrosion-resistant gas.
Specification:With an inner diameter of 40mm, the length protruding
from the inlet side of the tubular furnace is 60~200mm, and the
length extending from the outlet side is 60~100mm.The gap heating
expansion is left for use.
3. Burning boat:
| Material | Fused quartz tube. |
| Specifications | 100mm long, 25mm wide and 10mm deep |
| Feeding mode of combustion boat | Bar magnet and platinum wire are adopted |
4. Gas collection:Adopt two selected bottles:One of them is
equipped with a magnetic stirrer and is filled with 220ml sodium
hydroxide solution.
5. Air supply system
Air flowmeter:20ml~200ml adjustable
Compressor (your company's own)
6. Sampling:500mg~1000mg
7. Determination of halogen acid content:
Analytical balance:The accuracy is 0.1mg
Digital ph meter:The precision is 0.02ph
