Handheld Digital Multimeter With Continiuty,Diode Automatic Tester Features of Handheld Digital Multimeter - Testing diode
- Measuring resistance
- Transistor measuring
- Audible continuity testing
- Measuring AC and DC voltage
- Measuring AC and DC current
- 1000V DC or 750V AC RMS
Specifications | Range | Accuracy | DC Voltage | 200mV/2V/20V/200V | ±(0.5%+1) | 1000V | ±(0.8%+2) | AC Voltage | 200mV | ±(1.2%+3) | 2V/20V/200V | ±(0.8%+3) | 750V | ±(1.2%+5) | DC Current | 20µA | ±(2.0%+5) | 200µA/2mA/20mA | ±(0.8%+1) | 200mA/2A | ±(1.5%+1) | 20A | ±(2.0%+5) | AC Current | 200µA | ±(1.8%+3) | 2mA/20mA | ±(1.0%+3) | 200mA/2A | ±(1.8%+3) | 20A | ±(3.0%+7) | Resistance | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ | ±(0.8%+3) | 20MΩ | ±(1.0%+2) | 200MΩ | ±(6.0%+10) | Features | Display | 2000 counts | Data Hold | √ | Auto Power Off | √ | Diode Test | √ | Transistor Test | √ | Continuity | √ | General | Power Supply | 1*9V6F22 battery | Net weight | Approx.341g (battery is not included) | Gross weight | 540g | Size | 193mm*94mm*50mm | Safety Rating | EN61010-1, EN61010-2-033, EN61326, CAT. Ⅲ 1000V |
Description of Handheld Digital Multimeter This digital multimeter has been designed according to the
International Electro Safety Standard IEC-61010 concerning safety
requirements for electronic measuring instruments and hand-held
digital multimeters. This meter can measure AC&DC voltage,
AC&DC current, resistance and it has functions of data hold,
auto power off, diode test, transistor test, continuity test. - Usage: For example, wiring of switchboard and circuit protector
within fixed equipment includes cable, bus bar, junction box,
switch, socket output end, equipment for industrial purposes and
other equipment (such as permanently connected to fixed motor of
fixed equipment) for measurement.
- Measurement type II (CAT. II) is the measurement made on the
circuit which is connected directly to low voltage equipment.
- Note: For example, measuring household equipment, portable
instruments and similar devices.
- Measurement type I (CAT. I) is the measurement made on the circuit
which is not directly connected with bus bar.
- Note: For example, the measurement which is not made on the circuit
not derived from bus bar and special (internal) protection bus
circuit. (For the latter, the instant overload varies, so the
instant overload resistance of equipment must be clearly marked.)
|
