Copper mould tube for CCM Rectangular type Wall thickness 6-50mm
Length 700-1000mm Features:
· 100% high quality Chile originated Copper;
· CuDHP, CuAg0.1, CuCrZr, CuNiBe, CuCoNiBe alloy etc
· Cr/Ni/NiCo/Ceramic coating etc with various shapes;
· state of the art milling, drilling, measuring & testing
facilites etc with more than 20 years manufacturing experience,
- Situated in a critical position of continuous casting machine,
copper mould requires extreme high thermal-conductivity and high
strength. The molten steel will be formed into a certain shaped
steel billets immediately after it passes through the copper mould.
- Besides basic function of shaping and solidifying the steel strand,
copper mould is of great influence on the economics of continuous
casting lines.
- Not only the cost, the service life of copper mould and the quality
of the cast product are also considered as important factors by the
users.
- Therefore, suitable mould design as well as study of continuous
casters and working conditions is making stringent demands on the
manufacturers.
- BEIJING SINO EQUIPMENT Mould Factory is one of the leading
manufacturers of the copper mould in China. With more than twenty
years experience and through adopting advanced German technology,
BEIJING SINO EQUIPMENT copper mould has been winning acceptance
from the users worldwide.
- Our specialized know-how, quality control and service enable us to
satisfy the market’s changing requirements. Concentrating on
adaptability to the improvement of continuous casting technology
with continuously ongoing research and development word, BEIJING
SINO EQUIPMENT is providing optimal solutions to your moulds.
| Material | Chemical Composition | Mechanical Properties | Electric Conductivity (%IACS) | Cu
(%) | Others
(%) | Tensile Strength σ b (N/mm2) | Yield Strength σ 0.2 (N/mm2) | Elongation
δ
(%) | Hardness (HB) | | E-Cu | ＞99.90 | | 200 | 40 | 40 | 45 | 98 | | SF-Cu | ＞99.85 | P0.015-0.040 | 240-310 | 190-250 | 25-10 | 80-95 | 85 | | CuAg | ＞99.50 | Ag0.08-0.12 | 240-310 | 200-225 | 16-10 | 110-125 | 95 | | Cu-Cr-Zr | ＞98.0 | Cr0.3-1.2
Zr0.08-0.3 | 375-445 | 280-355 | 20-13 | 115-130 | 80 |
Product Scope:
| | | | Size | Square: □ 80mm~500mm
Arc Radius: 4000-17000mm
Wall thickness:6-50mm
Length: 700-1000mm
Rectangular: 100-500mm×650mm
Arc Radius: 4000-17000mm
Wall thickness:6-50mm
Length: 700-1000mm
Round: Ф110-Ф1200mm
Arc Radius: 5000-17000mm
Wall thickness:10-50mm
Length: 700-1000mm
H-beam: Intergrated stype
Arc Radius: 6000-17000mm
Wall thickness:12-50mm
Length: 780-1016mm
| | Coating | Coating material: Cr, Ni-Cr, Ni-Fe or Ni-co |
| Material | E-Cu, SF-Cu (DHP Cu), CuAg, Cu-Cr-Zr | | Design | Square, rectangular, round , plate, H beam | | Straight or curved | | Outer contour parallel | | Internal geometries: parallel, single tapered, double tapered,
multi-tapered, parabolic tapered, convex tapered |
| No. | Length
(mm) | Section
Dimension
(mm) | Curved
Radius
(mm) | Wall
Thickness
(mm) | Outer
Corner
Radius
(mm) | Inner
Corner
Radius
(mm) | Cr-Coating
Thickness
(mm) | | 1 | 700 | □80×80 | 7000 | 10 | 16 | 6 | 0.13 | | 2 | 812 | □90×90 | 7000 | 10 | 16 | 6 | 0.13 | | 3 | 700 | □90×90 | 5250 | 10 | 18 | 8 | 0.06~0.08 | | 4 | 700 | □100×100 | 6000 | 10 | 18 | 8 | 0.06~0.08 | | 5 | 750 | □100×100 | 6000 | 10 | 16 | 6 | 0.06~0.08 | | 6 | 812 | □100×100 | 4000 | 11 | 17 | 5 | 0.07~0.09 | | 7 | 801 | □101×101 | 4000 | 6 | 12 | 6 | 0.10 | | 8 | 780 | □110×110 | 5000 | 8 | 16 | 8 | 0.06~0.08 | | 9 | 801 | □110×110 | 6000 | 8 | 14 | 6 | 0.06~0.08 | | 10 | 887.2 | □110×110 | 6000 | 9.5 | 12.5 | 3 | 0.075 |
|
