Copper mould tube for CCM H beam Rectangular bloom triple taper - BEIJING SINO EQUIPMENT Mould Factory is one of the leading
manufacturers of the copper mould in China. With more than twenty
years experience and through adopting advanced German technology,
BEIJING SINO EQUIPMENT copper mould has been winning acceptance
from the users worldwide.
- Our specialized know-how, quality control and service enable us to
satisfy the market’s changing requirements. Concentrating on
adaptability to the improvement of continuous casting technology
with continuously ongoing research and development word, BEIJING
SINO EQUIPMENT is providing optimal solutions to your moulds.
| 21 | 1000 | □135×135 | 6000 | 10 | 20 | 10 | 0.06~0.08 | | 22 | 810 | □135×135 | 5250 | 12.3 | 18.3 | 6 | 0.07~0.09 | | 23 | 780 | □140×140 | 7000 | 11 | 16 | 6 | 0.06~0.08 | | 24 | 801 | □140×140 | 10250 | 12 | 18 | 6 | 0.06~0.08 | | 25 | 812 | □140×140 | 8000 | 12.3 | 20 | 8 | 0.10 | | 26 | 835 | □140×140 | 7924.8 | 12.5 | 17 | 6 | 0.10~0.12 | | 27 | 800 | □143×143 | straight | 11 | 21 | 10 | 0.06~0.08 | | 28 | 700 | □150×150 | 9000 | 12 | 20 | 8 | 0.08~0.10 | | 29 | 780 | □150×150 | 6000 | 12.5 | 18 | 5 | 0.08~0.10 | | 30 | 780 | □150×150 | straight | 10 | 22 | 12 | 0.06~0.08 | | 31 | 800 | □150×150 | 5250 | 12 | 20 | 8 | 0.08~0.10 | | 32 | 810 | □150×150 | 6000 | 12 | 22 | 10 | 0.06~0.08 | | 33 | 812 | □150×150 | 5250 | 15 | 27 | 12 | 0.06~0.08 | | 34 | 812 | □150×150 | 8000 | 12 | 18 | 6 | 0.13 | | 35 | 850 | □150×150 | 6000 | 12 | 20 | 8 | 0.06~0.08 |
| Material | Chemical Composition | Mechanical Properties | Electric Conductivity (%IACS) | Cu (%) | Others (%) | Tensile Strength σ b (N/mm2) | Yield Strength σ 0.2 (N/mm2) | Elongation δ (%) | Hardness (HB) | | E-Cu | ＞99.90 | | 200 | 40 | 40 | 45 | 98 | | SF-Cu | ＞99.85 | P0.015-0.040 | 240-310 | 190-250 | 25-10 | 80-95 | 85 | | CuAg | ＞99.50 | Ag0.08-0.12 | 240-310 | 200-225 | 16-10 | 110-125 | 95 | | Cu-Cr-Zr | ＞98.0 | Cr0.3-1.2 Zr0.08-0.3 | 375-445 | 280-355 | 20-13 | 115-130 | 80 |
Product Scope: | Material | E-Cu, SF-Cu (DHP Cu), CuAg, Cu-Cr-Zr | | Design | Square, rectangular, round , plate, H beam | | Straight or curved | | Outer contour parallel | | Internal geometries: parallel, single tapered, double tapered,
multi-tapered, parabolic tapered, convex tapered | | Size | Square: □ 80mm~500mm Arc Radius: 4000-17000mm Wall thickness:6-50mm Length: 700-1000mm Rectangular: 100-500mm×650mm Arc Radius: 4000-17000mm Wall thickness:6-50mm Length: 700-1000mm Round: Ф110-Ф1200mm Arc Radius: 5000-17000mm Wall thickness:10-50mm Length: 700-1000mm H-beam: Intergrated stype Arc Radius: 6000-17000mm Wall thickness:12-50mm Length: 780-1016mm | | Coating | Coating material: Cr, Ni-Cr, Ni-Fe or Ni-co |
|
