Multi-drug Test Dip Card COC/MET/MOP/BAR/TCA/PCP/BZO/MTD/AMP/THC Urine Rapid Test

Rapid Multi-Drug Test Dip Card (Urine)

Drug Test Instruction

The Multi-drug test is rapid chromatographic immunoassays for the qualitative and simultaneous detection of the following drugs in a variety of combinations in human urine.

This assay provided only a preliminary analytical test result. A more specific alternative chemical method must be used in order to obtain a confirmed analytical result. Gas Chromatography/ Mass Spectrometry (GC/MS) or Liquid Chromatography/ Mass Spectrometry (LC/MS) are the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are indicated.

Features

• Easy to use, do not require specialized laboratory equipment
• Quick detection, reading results in 5 mins
• High accuracy, CE, ISO13485 certificates

Contents

• Drug Test with desiccant
• IFU

Specimen Collection

• Collect urine sample with a clean, dry container. Urine collected at any time of the day may be used.

• For best results, test specimens immediately following collection.

• Urine specimens may be refrigerated (2-8°C) and stored up to forty-eight hours.

• For longer storage, freeze the samples (-20°C or below). • Bring frozen or refrigerated samples to room temperature before testing.

Operation of Test

1. Donor collects urine specimen in a urine cup.

2. Open the sealed pouch by tearing along the notch. Remove the test cassette or cup from the pouch and place it on a level surface.

3. Testing:

Dip the sample pad area of the dipstick strip or dipstick card in the urine specimen submerging only up to the“MAX” mark of the dipstick strip or the edge of the dipstick card.

4. The result should be read within 5 minutes. Do not interpret the result after 10 minutes. See the illustration below:

5. Results:

Preliminary positive (+) Only one colored band appears in the control region (C). No colored band appears in the test region (T).

Negative (-) Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).

Invalid Control band fails to appear.

Product Pictures