One Step Chlamydia Rapid Test Cassette Urine Swab Sample Device Kit
|
|
One Step Chlamydia Rapid Test Cassette to Test Swab/Urine Sample Device Kit
INTENDED USE Allow the test, specimen, reagents, and/or controls to reach room
temperature (15-30°C) prior to testing. 1. Remove the test cassette from the sealed foil pouch and use it
as soon as possible. Best results will be obtained if the test is
performed immediately after opening the foil pouch. 2. Extract the Chlamydia antigen according to the specimen type. For Female endocervical or Male urethral swab specimens:• Place a clean extraction tube in the workstation. Add 5 drops of Ragent 1 to the extraction tube. • Immerse the patient swab into the extraction tube and wait 2 minutes. While waiting, use a circular motion to roll the swab against the side of the extraction tube so that the liquid is expressed from the swab and can reabsorb. • Add 6 drops of Reagent 2. Squeeze the swab firmly against the tube to expel as much liquid as possible from the swab for 1 minute. Discard the swab following guidelines for handling infectious agents. Fit the dropper tip on top of the extraction tube. • The extracted specimen can remain at room temperature for 60 minutes without affecting the test result. For Male urine specimens: • Add 6 drops of Reagent 2 to the urine pellet in the centrifuge tube, then draw the liquid up and down with a pipette to vigorously mix until the suspension is homogeneous. • Transfer all the solution in the centrifuge tube to an extraction tube. Let stand for 2 minute. Hold the Reagent 2 bottle upright and add 5 drops of Reagent 1 to the extraction tube. Vortex or tap the bottom of the tube to mix the solution. Let stand for 1 minutes. • Fit the dropper tip on top of the extraction tube. 3. Add 3 drops (approximately 100 µL) of extracted specimen from
the extraction tube to the specimen well (S) of the test cassette. Avoid trapping air bubbles in the specimen well (S), and do not add
any solution to the result window.As the test begins to work, color will migrate across the membrane. 4. Wait for the colored band(s) to appear. The result should be read
at 10 minutes. Do not interpret the result after 20 minutes. FRQ: 1) What can cause chlamydia?
2) Can chlamydia go away?
3) How did you know you had chlamydia?
4) Is chlamydia the same as gonorrhea?
5) How did I get chlamydia if my partner is clean?
6) Can you have chlamydia and not pass it on?
7) Is chlamydia a lifelong STD?
8) Does chlamydia cause a smell?
12) Why is chlamydia called the clap?
|
| Product Tags: One Step Chlamydia Rapid Test Cassette Urine Swab Chlamydia Rapid Test Cassette ISO Chlamydia Rapid Test Cassette |
|
Cytomegalovirus CMV IgG/IgM Combo Rapid Test Cassette(W/S/P) |
|
First Response HIV 1+2/Syphilis Combo Card Test in Human Serum, Plasma or Whole Blood |
|
5-min Multi-Dipstick 6 Drug Urine Rapid Test Kit |
|
Dewei Hepatitis E Virus IgM Antibody Check HEV Rapid Test Cassette |
|
One Step CHW Test Canine Heartworm Antigen Rapid Diagnostic Kit 10 Test Box |
|
Cost Effective Giardia Lamblia Antigen (GIA)Rapid Test in Human Feces |
