Rapid Chlamydia Test Kit Swab / Urine Sample Rapid Diagnostic Test Kit
|
|
Rapid Chlamydia Test Antigen Swab Urine Rapid Diagnostic Test Kit
【INTENDED USE OF CHLAMYDIA TEST】 The Chlamydia Rapid Test (Swab/Urine) is a rapid visual immunoassay for the qualitative presumptive detection of Chlamydia trachomatis in female cervical swab, male urethral swab and male urine specimens. This kit is intended for use as an aid in the diagnosis of Chlamydia infection.
【OPERATION OF OF CHLAMYDIA TEST】 Allow the test, specimen, reagents, and/or controls to reach room temperature (15-30°C) prior to testing. 1. Remove the test device from the sealed foil pouch and use it as soon as possible. Best results will be obtained if the test is performed immediately after opening the foil pouch. 2. Extract the Chlamydia antigen according to the specimen type. For Endocervical or urethral swab specimens: • Place a clean extraction tube in the workstation. Add 8 drops of reagent A to the extraction tube. • Immerse the patient swab into the extraction tube and wait 2 minutes. While waiting, use a circular motion to roll the swab against the side of the extraction tube so that the liquid is expressed from the swab and can reabsorb. • Add 8 drops of reagent B. Squeeze the swab firmly against the tube to expel as much liquid as possible from the swab for 1 minute. Discard the swab following guidelines for handling infectious agents. Fit the dropper tip on top of the extraction tube. • The extracted specimen can remain at room temperature for 60 minutes without affecting the test result. For Male Urine Specimens: • Add 8 drops of reagent A to the urine pellet in the centrifuge tube, then draw the liquid up and down with a pipette to vigorously mix until the suspension is homogeneous. • Transfer all the solution in the centrifuge tube to an extraction tube. Let stand for 2 minute. Hold the Reagent B bottle upright and add 8 drops of Reagent B to the extraction tube. Vortex or tap the bottom of the tube to mix the solution. Let stand for 1 minutes. • Fit the dropper tip on top of the extraction tube. 3. Add 3 drops (approximately 100 µL) of extracted specimen from the extraction tube to the specimen well (S) of the test cassette. Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result window. As the test begins to work, color will migrate across the membrane. 4. Wait for the colored band(s) to appear. The result should be read at 10 minutes. Do not interpret the result after 20 minutes.
【INTERPRETATION OF CHLAMYDIA TEST】 POSITIVE: The presence of two lines as control line (C) and test line (T) within the result window indicates a positive result. NEGATIVE: The presence of only control line (C) within the result window indicates a negative result. INVALID: If the control line (C) is not visible within the result window after performing the test, the result is considered invalid. Some causes of invalid results are because of not following the directions correctly or the test may have deteriorated beyond the expiration date. It is recommended that the specimen be re-tested using a new test.
FRQ: 1) What can cause chlamydia?
2) Can chlamydia go away?
3) How did you know you had chlamydia?
4) Is chlamydia the same as gonorrhea?
5) How did I get chlamydia if my partner is clean?
6) Can you have chlamydia and not pass it on?
7) Is chlamydia a lifelong STD?
8) Does chlamydia cause a smell?
12) Why is chlamydia called the clap?
|
| Product Tags: Rapid Chlamydia Test Kit Swab Urine Chlamydia Test Kit Chlamydia Rapid Diagnostic Test Kit |
|
Cytomegalovirus CMV IgG/IgM Combo Rapid Test Cassette(W/S/P) |
|
First Response HIV 1+2/Syphilis Combo Card Test in Human Serum, Plasma or Whole Blood |
|
5-min Multi-Dipstick 6 Drug Urine Rapid Test Kit |
|
Dewei Hepatitis E Virus IgM Antibody Check HEV Rapid Test Cassette |
|
One Step CHW Test Canine Heartworm Antigen Rapid Diagnostic Kit 10 Test Box |
|
Cost Effective Giardia Lamblia Antigen (GIA)Rapid Test in Human Feces |
