KLJ-MC26Y-00 KLJ-MC261-00 ZS1216MM Feida Tail Cover

KLJ-MC26Y-00 KLJ-MC261-00 ZS1216MM Feida Tail Cover

Product Introduction – KLJ-MC26Y-00 & KLJ-MC261-00

YS/Zs 12–16 mm Feeder Tail Cover Assembly

These are genuine Yamaha ZS-series feeder tail covers, designed to fit 12 mm and 16 mm Yamaha ZS (electronic) feeders used in SMT pick-and-place machines. Tail covers protect the feeder’s rear tape exit area, ensuring smooth tape ejection and preventing debris from interfering with operation.

Key Features

Specifically modelled for Yamaha ZS feeder 12–16 mm widths
Made from durable, injection-molded plastic
OE-quality design ensures precise alignment and reliability
Easily snap-on or screw attachment for quick replacement during maintenance ([dobeter.com][1])

Function & Benefits

Shields the feeder tape path and reduces the risk of tape jams
Enhances longevity of the feeder by preventing foreign object intrusion
Compatible with ZS-type Yamaha feeders, widely used in YSM/YV/YS placement machines&x20;

Related Part Numbers

KLJ-MC26Y-00 – Top tape box/tail cover assembly for 12–16 mm ZS feeders
KLJ-MC261-00 – Alternate or replacement tail cover variant for the same feeder range

Related Accessories – KLJ-MC26Y-00 / KLJ-MC261-00

1. Feeder Main Body (12mm / 16mm)

Compatible Yamaha ZS 12mm or 16mm electronic feeders that house the tail cover.
Typical part numbers include:

KW1-M4500-015 (12mm ZS feeder)
KW1-M4500-035 (16mm ZS feeder)

2. Top Tape Guide Plate

Guides the top cover tape through the feeder to ensure smooth peeling and feed alignment.

3. Tape Peel-off Roller

Works in conjunction with the tail cover to peel back the top cover tape as the component tape advances.

4. Tail Cover Mounting Screws / Clips

OEM fasteners or clips used to secure the tail cover to the feeder body (if not snap-fit).
Part numbers may include:

91312-03004 (M3 mounting screws)
KGS-M3696-00 (retainer clip or hinge, model-dependent)

5. Spring Clip or Locking Arm

Ensures the tail cover stays in place and opens/closes properly during feeder loading/unloading.

6. Feeder Sensor Cover (Optional)

Plastic shield for sensors that detect cover tape status or tail jam conditions (machine-dependent).

Related Part Numbers – KLJ-MC26Y-00 / KLJ-MC261-00

Main Parts

KLJ-MC26Y-00 — ZS 12–16mm Feeder Tail Cover (Top Tape Box)
KLJ-MC261-00 — Alternate or variant model of tail cover for the same feeder type

Compatible ZS Feeders

KW1-M4500-015 — Yamaha ZS Feeder 12mm
KW1-M4500-035 — Yamaha ZS Feeder 16mm

Related Components

KGS-M3696-00 — Spring lock / Clip for securing the tail cover
91312-03004 — M3 Screw for tail cover mounting
KLJ-MC27T-00 — Tape guide plate for ZS feeder
KLJ-MC28R-00 — Cover tape peeling roller
KLJ-MC26R-00 — Tail cover sensor shield (if applicable)
KWT-M650C-000 — Feeder connector block (used in feeder docking area)

FAQ Guide – KLJ-MC26Y-00 / KLJ-MC261-00

(ZS Feeder 12–16mm Tail Cover / Top Tape Box)

1. What is the function of the KLJ-MC26Y-00 tail cover?

It protects the tail end of the tape path on Yamaha ZS 12–16mm feeders and assists in the clean exit of peeled cover tape, preventing jams and contamination.

2. Which feeders are compatible with these tail covers?

They are compatible with Yamaha ZS-series 12mm and 16mm feeders, such as:

KW1-M4500-015 (12mm)
KW1-M4500-035 (16mm)

3. What is the difference between KLJ-MC26Y-00 and KLJ-MC261-00?

They serve the same function; KLJ-MC261-00 may be a revision, region-specific variation, or alternative design depending on supplier stock and feeder generation.

4. Is this part easy to replace?

Yes. It typically uses snap-fit or simple screw fastening. Replacement can be done without removing the entire feeder from the machine.

5. What causes tail covers to wear out?

Friction from the tape, accumulated dust, improper tension, or operator handling may lead to cracking, loosening, or misalignment.

6. Can I use the feeder without a tail cover?

It is not recommended. Missing tail covers can lead to:

Tape jams
Poor tape ejection
Debris buildup
Machine errors

7. Are the tail cover accessories (e.g., roller, clip) replaceable?

Yes, individual components such as rollers, clips, and guide plates are replaceable if worn or damaged.

8. How do I know when to replace the tail cover?

Inspect for:

Cracks or wear
Loose fitment
Deformed tape guide surfaces
Frequent tape jams or peel failures

9. Where can I buy KLJ-MC26Y-00 or KLJ-MC261-00?

From authorized Yamaha distributors or SMT parts suppliers online or locally.

10. Do I need to calibrate the feeder after replacing this part?

No calibration is needed, but it's good practice to verify tape feeding performance after replacement.

Physical warehouse,
fast delivery
after-sales support
providing door-to-door transportation services
price advantages,
offering a full range of SMT dip equipment and accessories

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

 
 
Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx