High-Precision Samsung CWEF-YE32-V8 Feeder for Efficient Component Placement

Samsung Feeder CWEF-YE32-V8

Product Introduction – Samsung CWEF‑YE32‑V8 Feeder

A reliable version of Samsung's 32 mm intelligent electric feeder—designed for fast, high-mix SMT production lines using Samsung / Hanwha pick-and-place platforms (SM, CP, DECAN, SME series).

Key Features

Electric-driven operation, eliminating compressed air requirements
Handles 32 mm tape, ideal for larger passive components and small ICs
Compatible with 4- or 5‑pin connector interfaces, depending on machine generation
Built-in motor, encoder, and sensor logic, enabling precise feeding and error detection
Supports rapid feeder swaps and high-density feeder banks

Typical Specifications

Tape width: 32 mm (single-lane standard)
Drive system: Internal motor + control PCB (V8 firmware)
Mounting: Compatible with Samsung/Hanwha feeder banks for SM/CP/SME/DECAN machines
Features: Tape advance, end/tape presence sensing, motor feedback, optional cover tape rewind

Applications

Used for feeding medium to large components (chip inductors, capacitors, connectors, small ICs) in high-volume SMT lines on platforms such as:

SM421, SM471, SM482
CP series: CP40 / CP45 / CP60
DECAN S1/S2
SME series electric feeder lines

Typical Maintenance & Related Accessories

Key spare parts often shared with similar Samsung electric feeders include:

Tape guide rails
Cover tape pushers & reels
Motor & gearbox assemblies
Sensor PCB and encoder board
Tape-end sensor assemblies
Calibration jigs for alignment testing

Related Accessories – Samsung CWEF-YE32-V8 Feeder

1. Mechanical Components

Tape Guide Rail Assembly
Ensures smooth feeding of 32 mm tape and accurate component positioning.

Cover Tape Pusher
Lifts and separates the cover tape from the carrier to expose components for pickup.

Upper Cover Plate / Clamp Assembly
Holds the component tape firmly in place to avoid misfeeds.

Lock Pin / Feeder Locking Knob
Secures the feeder into the feeder bank slot during machine operation.

Feeder Side Cover Plate
Protects internal components and motor housing from damage or debris.

2. Drive & Electronic Components

Stepper Motor Assembly
Drives the feeder’s internal mechanism to advance the tape precisely.

Gearbox / Drive Unit
Transfers torque from the motor to the tape feed mechanism.

Main Control PCB
Handles motor control, communication, and sensor input/output.

Tape Sensor Board (Presence & End Sensor)
Detects the presence of tape and alerts when the reel is finished or misaligned.

Feeder Signal Cable (4-pin or 5-pin)
Provides power and control signals from the pick-and-place machine to the feeder.

3. Calibration & Maintenance Tools

Feeder Calibration Jig / Test Fixture
Allows off-machine testing, adjustment, and verification of feeder performance.

Tape Rewind Reel
Collects cover tape waste for clean and efficient operation.

Spring Plate / Compression Plate
Applies pressure to maintain tape alignment during feeding.

Tape Guide Support Bracket
Ensures rigidity and precision in the tape path.

4. Storage & Handling

Feeder Storage Rack / Cart
Used to organize and safely store multiple feeders when not in use.

Feeder Tray
Helps with organized loading/unloading during changeovers.

These accessories are essential for the smooth operation, alignment, and maintenance of the CWEF-YE32-V8 32mm electric feeder and are typically shared across other Samsung electric feeder widths (8mm, 12mm, 24mm, etc.).

Related Part Numbers – Samsung CWEF-YE32-V8 Electric Feeder

1. Mechanical Components

2. Electrical / Drive Components

3. Calibration / Maintenance Tools

These parts are either direct replacements or compatible components commonly used in Samsung/Hanwha SME-series electric feeders, including the CWEF-YE32-V8.

FAQ Guide – Samsung CWEF-YE32-V8 Electric Feeder

1. What is the CWEF-YE32-V8 used for?

The CWEF-YE32-V8 is a 32 mm intelligent electric feeder used to supply medium to large surface-mount components (e.g., connectors, ICs, power modules) from carrier tape to SMT machines like the SM, CP, DECAN, and SME series.

2. Which SMT machines is it compatible with?

It works with Samsung/Hanwha pick-and-place machines that support electric feeders, including:

SM Series: SM421, SM471, SM482
CP Series: CP45, CP60
DECAN Series: S1, S2
SME Series: Feeder banks with 4-pin or 5-pin support (check connector version)

3. What is the main difference between the V8 and older V7 versions?

The V8 version includes improved internal firmware, faster feeding cycles, more reliable motor performance, and better compatibility with newer DECAN/SME systems.

4. Is it electric or pneumatic?

It is fully electric, meaning it runs via a built-in motor and PCB controller, with no need for compressed air.

5. What size of components or tape does it support?

Tape width: 32 mm
Suitable for larger electronic components, such as:

Large ICs
RF modules
Connectors
Power semiconductors

6. What are common problems and how to troubleshoot them?

7. What parts are most commonly replaced?

Motor Assembly – J90551427A
Gearbox – J90651417A
Sensor PCB – J67031002A
Tape Guide Rail – J66021001A
Cover Tape Pusher – J66011003A
Control PCB – J90851407A

8. How do I calibrate or test the feeder?

Use the Feeder Calibration Jig (e.g., J13013001A) to verify feeder advance, alignment, and error detection outside the SMT machine.

9. Does it support cover tape rewinding?

Yes, it can be equipped with a tape rewinder reel (e.g., J13014004A) to manage waste cover tape during operation.

10. How often should I maintain it?

Light usage: Clean and inspect every 1–2 weeks
Heavy usage: Check after each reel or shift
Quarterly: Replace motor or worn mechanical parts depending on load

Physical warehouse,
fast delivery
after-sales support
providing door-to-door transportation services
price advantages,
offering a full range of SMT dip equipment and accessories

We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT

 
 
Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx