| Detected circuit board | Post-SMT board inspection after SMT printing |
| Detection method | The TOC algorithm, WELD algorithm, MATACH algorithm, COMPARE
algorithm, LENGTH algorithm, OCV algorithm and other international
leading algorithms, the system automatically sets its parameters
according to different detection points |
| camera | High-speed smart digital industrial camera |
| Resolution / Vision Range / Speed | Standard: 15μm/Pixel 30.72mm×30.72mm Detection speed <160ms/FOV; |
| | Optional: 8μm/Pixel 16.00mm×16.00mm Detection speed <180ms/FOV; |
| light source | Bright three-color ring LED light source + flat LED light source
(color light) |
| Programming mode | Importing Gerber files for automatic programming, automatic frame
drawing, automatic search for component libraries and many other
quick programming methods |
| remote control | In the LAN, remote operation via TCP / IP network, view, start or
stop the operation of the machine, modify the program and other
operations |
| Detection coverage type | Bad after printing: presence or absence, spilled tin, offset, tin,
tip, multiple tin, open circuit, continuous tin, pollution, etc. |
| | Adverse defects after patch: missing parts, offsets, flips, wrong
parts, reverses, etc. |
| Special features | Support automatic call-up program, multi-board multi-program
detection function |
| Bar code system | Automatic barcode recognition (1D or 2D code) |
| Server mode | Using centralized data server, centralized management of several
SPI data |
| operating system | Windows 7 Professional |
| Inspection result output | 22-inch LCD monitor or other extensions |
| System parameters | |
| CPK | > 1.33 (4σ, ±40um) |
| PCB size range | 50×50mm(Min)～510×500mm(Max) |
| PCB thickness range | 0.3 to 5 mm |
| PCB clamping system edge clearance | TOP: 2mm Bottom: 2mm |
| The maximum PCB weight | 3KG |
| PCB curvature | <5mm or 2% of the PCB diagonal length |
| Clear height above and below PCB | PCB Top (Top Side): 30mm PCB Bottom Side: 85mm |
| Conveyor system | Bottom-up fixed, automatic compensation for PCB bending
deformation, automatic feeding in and out of plate, flat belt,
automatic adjustment of width |
| Conveyor height above ground | 890 to980mm |
| Conveyor flow | Can be set to Left → Right → Left by buttons |
| X/Y platform driver | Screw and AC servo motor drive; PCB fixed, Camera moves in XY
direction, each one is CTQ certified |
| power supply | AC230V 50/60 Hz is less than 1.5KVA |
| Pressure | 0.4～0.8Mpa |
| Before and after device communication | Smema or extended Smema protocol |
| equipment weight | About 700KG |
| Equipment dimensions | 900 × 1300 × 1565mm (L × W × H) does not include the height of the
signal lamp |
| Environmental temperature and humidity | 10 to 35°C 35 to 80% RH (without condensation) |
| Equipment safety regulations | Comply with CE safety standards |
| Optional items | 1) SPC repair station 2) NG Buffer 3) Off-line programming |
