Green Deutsch 9 Pin J1939 Male to J1962 OBD OBD-II Male CAN Bus
Cable
Specification
| 9-Pin J1939 male connector | equivalent of Deutsch HD10-9-1939P-P080 |
| Type of 9-Pin J1939 male plug | Type 2 |
| Color of 9-Pin J1939 male plug | Green |
| Wire | 20AWG, pure copper |
| Material of 9-Pin J1939 male plug | PA66 + glass fiber |
| Material of OBD2 male plug | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and mis-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The end of Deutsch 9-Pin J1939 male connector can be
overmolded or not, according to your needs. If the ends are
overmolded, the cables are more sturdy and durable. If not
overmolded, the price can be lower because the raw material and
labour cost is saved.
The Deutsch 9 Pin male connector of this cable is Type 2, so its Pin F is with smalller diameter as Pin C and Pin J.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this
(4 pins connected):
| OBD2 male | Signal | 9-Pin J1939 male |
| 4 or 5 | Ground | A |
| 16 | Battery | B |
| 6 | J1939, CAN-H | C |
| 14 | J1939, CAN-L | D |
Sometimes, the pin assignment or pin out can also be like this (6 pins connected):
| OBD2 male | Signal | 9-Pin J1939 male |
| 4 or 5 | Ground | A |
| 16 | Battery | B |
| 6 | J1939, CAN-H | C |
| 14 | J1939, CAN-L | D |
| 2 | J1708-H | F |
| 10 | J1708-L | G |
The pin assignment or pin out can also be customized according to
your needs. If there is no need for more pins to be connected, we suggest we
just connect the necessary pins you need. If more pins are
connected, the price of the cable will be higher because the raw
material and labour cost will be higher.
Application
This cable will connect the 8 or 9 Pin type 2 devices such as
ELDs (Electronic Logging Devices) to the 16 Pin OBD2 style
diagnostic port found on Volvo and Mack trucks post 2013
that have the OBD-II 16 pin port in dash.
If you have a device that is designed to plug into the round Green
9 pin diagnostics ports on heavy trucks, this cable will work for
you to connect that device to 16 pin OBD2 type connector found in
2013 and newer Volvo and Mack trucks.
You can connect 16 pin OBD2 male plug of this cable into
your truck's 16 pin diagnostics port. The green 9 pin on other
end will then accept some ELDs that have the round
8 OR 9 position plugs.
This adapter cable also allows a J1939 Scan Tool (a scanner
designed to plug into the round J1939 9-pin Deutch connector on a
vehicle) to be used with a J1939 equipped vehicle that uses a
standard OBD2 style connector.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel
free to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
