400Kg capacity automatic pecan huller machine black walnut huller
machine
Walnut huller machine is mainly used for peeling the shell of dried walnuts, and can
flexibly adjust the internal gap according to the variety and size
of the walnut, so as to achieve a good shelling effect. Walnut huller machine feeds from the upper hopper, and the shell and shell are separated
after being shelled. Thereby facilitating manual branching and
improving work efficiency.
Principle
The walnut sheller consists of a frame, a fan, a rotor, a
single-phase motor, a screen (two types), a hopper, a vibrating
screen, a V-belt wheel and a transmission triangle. After the
machine is in normal operation, the walnut is quantitatively,
uniformly and continuously put into the hopper. The walnut is
broken under the repeated impact, friction and collision of the
rotor. The walnut kernel and the broken shell pass under the
rotating wind pressure and blow of the rotor. A sieve with a
certain pore size (a large-diameter sieve for secondary
de-granulation, a small peeled fruit after cleansing is replaced
with a small-hole sieve for a second shelling) is filtered and
separated. The shell and pellet of the walnut are blown out by the
rotating fan, so that the light weight shell is blown out of the
machine body, and the heavier weight is filtered through the sieve
to achieve the purpose of cleaning.
Features
1. This product has light weight, small volume, convenient
transportation, simple operation, flexible use and high processing
efficiency.
2. The removal rate of the equipment is higher than 99%, and the
damage rate of the walnut shell is less than 0.5%. Suitable for
small processing enterprises or walnut processing business
operators.
3. Walnut huller machine adopts 220V or 380V power motor with power of 0.75--3kW, energy
saving and convenient use.
4. The machine has low failure rate, long service life, simple
operation, convenient maintenance, and no consumables for long-term
use.
5. the machine cost-effective, saving manpower, 1-2 people can
operate, depending on the model, can process more than 3 tons per
day.
6. The equipment runs smoothly, the noise is low, and the supply of
parts is guaranteed.
