TC 125x160x13mm Rear Wheel Oil Seal For Fuwa Axle NBR

Product Name:

TC 125x160x13mm Rear Wheel Oil Seal for Fuwa Axle NBR

Technical Data:

Oil seal type:
TC, TB, SC, SB, TB5SY, VC, VB,VK ,TA, SA ,SAY,SCNY2,SCOT,SCOTPLUS
TCV, TCN, TCN-6, TZ TCHD, TCHD-1 ,ISPID, 15Z, 15Z-3,
TC4, TB4, DC, DB,DCY, HSCL,HTC ,HTC9L,HTGL,KC, VR, MG, CNB, SCJY, SCY, VK

How to order?
1. Tell me the size of the product you want to order (inner diameter, outer diameter, height) and material, or you can give me           the drawings directly.
2. We will communicate to you at the most reasonable price the first time we receive it.
3. If samples are needed, we can provide samples for free, but you need to pay the shipping cost of the sample (if the order is      sold, we can reduce the shipping cost you paid)
4. Arrange production, arrange delivery

Installation method:

1. The installation of the oil seal can be flush with the front end of the casing aperture, or it can be close to the low section of          the casing aperture.

2. The reference planes for installation and positioning should be machined surfaces, and the unprocessed reference planes          cannot be used.

3. The outer diameter of the oil seal should be coated with a layer of lubricant.

4, using hydraulic or pneumatic uniform pressure compression oil seal.

Note:

The matching surface of the oil package is flush with the reference surface of the housing to ensure the verticality of the shaft and the center of the shaft after the shaft is installed, so that the oil seal lip becomes a line contact belt on the shaft surface to achieve a good sealing effect.