271 - 280 of 753
api normalized sucker rods
Selling leads
|
After the rod type oil well pump is integrally assembled on the ground, it is connected to the lower end of the sucker rod and runs into the well ...
2024-12-09 17:15:06
|
|
Sucker Rod Introduction: Size in (mm) Rod Body diameter in (mm) diameter of ext. thread in (mm) Full size Coupling OD mm (in) Coupling OD mm (in) ...
2025-04-11 10:26:26
|
|
.... The API pump-bore sizes that are currently available range from 1 1/16 to 3 3/4 in. in diameter. This 1 1/16-in. size has been added back in the ...
2024-12-09 17:37:15
|
|
...) , seating nipple connection on the tubing string, down to the bottom of the well with the tubing string. Plunger assembly connection on the ...
2024-12-09 12:46:45
|
|
API 11 AX Sucker Rod Pump Parts / Barrel Plunger Products Characters: Sucker rod pump is equipped with a seating nipple(there are two seating nipples ...
2025-07-19 00:12:48
|
|
... T and Class SM coupling for sucker rods are manufactured as per API 11B. 2. Class T coupling is using AISI 5140 to manufacture. 3. As for Class SM ...
2025-04-26 17:31:49
|
|
...Material 3.1. Chemical Composition The chemical composition of polished rods are any composition of AISI recommended series steels that conform to ...
2025-07-19 00:12:49
|
|
...,and with its down to the bottom of the well.Plunger assembly connected on the sucker rod string and with it down to the pump barrel position in ...
2025-07-19 00:12:48
|
|
...Sucker Rod Pump Fitting 1. Description Surface of the plunger is coated with nickel alloy and inside wall of the barrel is coated with hardness ...
2025-07-19 00:12:49
|
|
Chinese API sucker rod pump Main parts process and material: Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ...
2025-07-19 00:12:48
|