Heavy Wall Mechanical Seating API Well Pump Tubing
Heavy wall mechanical seating tubing pump description:
For heavy wall tubing pump, the barrel is put in the well to the
designed depth with tubing. And then put the plunger into the
barrel with sucker rod. Given the tubing size, the bore of the
tubing pump is larger than that of the rod pump, so the pump rate
is higher.
According to seating mode, the rod pump can be divided into three
types: THC pump (Stationary Heavy Wall, Cup Seating, Tubing pump),
THM pump (Stationary Heavy Wall Mech. Seating, Tubing Pump) and THD
pump.
Operating principle of tubing pumps:The pump barrel assembly
directly fixed on a tubing string. the plunger assembly connected
on the sucker rod string ,and with the up and down reciprocating
motion, so as to realize the production process. Its advantage lies
in: in the process of oil production, when the traveling valve and
fixed valve side problems arise,valve side can be proposed by the
sucker rod, piston and extractor , don’t put the whole pump and
tubing string out of the well, reduce the work intensity and the
operation cost.
Sucker rod pump and tubing pump technical parameters:
| | basic technical parameters |
| Type | Diameter(mm) | Barrel Length (m) | Stroke Range (m) | Length of Extension Pub Joint(m) | Thread for Tubing(in) |
| Rod pumps | 31.8 | 2.1
2.4
2.7
3.0
3.3
3.6
3.9
4.2
4.5
4.8
5.7
6.0
6.6
7.3
9.1 | 1.5-6 | 0.3
0.6
0.9 | 2 3/8 |
| | 38.1 | | | | 2 7/8 |
| | 44.45 | | | | 2 7/8 |
Tubing
pump | 31.8 | | 1.5-7.8 | 0.3
0.6
0.9 | 2 3/8 |
| | 38.1 | | | | 2 7/8 |
| | 44.45 | | | | 2 7/8 |
| | 57.15 | | | | 2 7/8 |
| | 69.85 | | | | 2 7/8 3 1/2 |
| | 82.55 | | | | 3 1/2 |
| | 95.25 | | | | 3 1/2 |
Photo for oil well tubing pump delivery:
