High Precision Float Ball Fuel Tank Level Level Switch Controller
|
|
High Precision Float Ball Fuel Tank Level Level Switch Controller Product Description UHK magnetic floating ball and float level switch are made up of
reed pipe and magnetic float. It is based on the buoyancy
principle, using the floating ball with magnetic components to
drive the corresponding position of the reed tube to close or
disconnect, so as to realize the detection and control of the high
and low position of the liquid level. Features 1, long life span, stable and reliable operation, easy installation, almost no maintenance 2, none influence of measured medium in physical and chemical state. Eg: medium electrical conductivity, dielectric constants, foam, pressure, temperature, evaporation, boiling, bubbling effect etc, . 3, choose appropriate material can be used in a variety of bad media environment with densities ≥ 0.5G/CC ; 4,-interface measurement with two media of different density control; 5,wide range of application. Pressures from vacuum to PN160 (special up to PN320), temperature -40~+150 ° c; 6,design, explosion-proof, suitable for explosive environments; 7,UHKG controller can be used to control the upper and lower liquid level.
Operation: Two control method of one magnetic float level gauge: 1,the upper limit—users select the normally open contact connection: the machine starts when the liquid level reaches the controlled upper limit and the node closes. When the liquid level reaches the controlled lower limit and the node opens, the machine stops. (eg. When the liquid flows out the pump); 2,the lower limit—users select the normally closed contact connection: the machines starts when the liquid level reaches the controlled lower limit and the node closes. When the liquid level reaches the controlled upper limit and the node closes, the machine stops. (eg. When the liquid flows in the pump);
Technical Data:
The magnetic suspension level gauge and the container to be measured form a communicating device, so that the liquid level between the container to be measured and the measuring tube body is equal. When the float in the measuring tube of the liquid level gauge changes with the measured liquid level, the magnetic body in the float interacts with the magnetic body in the color code displayed on the display bar and reverses, so that red means there is liquid and white means no The purpose of accurately displaying the liquid level on the spot. Magnetic levitation pair installed horizontally A) When the user receives the product, he must carefully check the product to see if there is any damage during transportation and whether it is consistent with the order requirements. After checking, install it correctly in the following order. B) Float and measuring tube are packed separately. Remove the bottom flange, make the upper part of the float upward, put the float into the measuring tube, and install the bottom flange. Then connect with the container to be measured C) The magnetic body in the float interacts with the magnet in the color bar on the display screen, the color code is reversed, red means liquid, and white means no liquid. Note: Handle the float carefully to avoid damage; In order not to affect the read value, all the floats in the display column must be adjusted to white before installation. |
||||||||||||||||||||||||||||||||||||||
| Product Tags: float switch fluid level controller water tank level controller |
|
Vacorda High Sensitivity Tuning Fork Switch High Temperature Resistant |
|
|
Vacorda High Sensitivity Tuning Fork Switch High Temperature Resistant |
|
Magnetic water liquid level float switch |
|
Magnetic Floating Ball Type Water Level Switch |
|
Multipoint Magnetic Float Level Switch With Accurant Work Principle Of Float Switch |
|
High Performance Float Level Switch Controller With 4-20mA Output |