Customized Sliding Aluminum System Window Heat Insulation Profile Windproof 1.8mm Glass

Modern Window Profile Wind-proof Customized Sliding Aluminum Window
Product Description:

With the development of the door and window industry, systematic doors and windows have gradually come into people's view. The system door and window is a kind of door and window with very strong comprehensive performance, and its various performances can reach the middle and upper level or even the highest level. It has the characteristics of longer average actual service life, matching or multiple combinations, and lower comprehensive cost.

Configuration Instructions

Hardware configuration: HOPPE / GIESSE / PAG

Glass configuration: 5mm+20A+5mm

Sealing strip: Tianshang EPDM foam composite strip

Profile thickness: 1.6-1.8mm

Width of inner surface: frame 56mm/leaf 52mm

Outer frame width: 70mm

Performance Parameter

Airtight Parameter: Grade 8

Watertight Parameter: Grade 5

Wind Resistance Parameter: Grade 9

Thermal Insulation Parameter: Grade 7

Sound Insulation Parameter: Grade 4

Features of broken bridge aluminum Windows

• Double-layer hollow tempered glass can reduce the heat loss of door and window glass, and has good effects of noise reduction, energy saving and thermal insulation.

• The profile multi-cavity design can reduce the heat loss caused by air convection, achieve good thermal insulation, and also cut off the transmission of sound.

• PE energy-saving and silent cotton can be filled to effectively improve the structure of doors and windows as well as the thermal insulation and heat insulation performance.

• The new national standard 24mm wide PA66GF25 nylon thermal insulation strip is adopted, which has sufficient strength and accuracy to isolate the heat transfer channel and bring stable thermal insulation performance to the whole window.

• Three sealing structures can effectively separate the water vapor cavity, successfully achieve water isobaric balance, and significantly improve the water tightness and air tightness of doors and windows.

• Standard closed crimping, with sponge inside, tight profile, no gap, blocking air return, and improving the sealing of doors and windows.

Advantages of broken bridge aluminum
1)Independent sealing structure

The sliding window adopts double rubber strips, double wool strips and four sealing structures; The casement window uses the principle of equal pressure, adopts a hard seal and two soft seals and three seals, which has excellent air tightness and water tightness.

2)Colorful

After anodizing and powder coating for surface treatment, more than 200 types of aluminum profiles with different colors in RAL color series can be produced. After rolling and combination, the thermal insulation aluminum alloy doors and windows can produce dual color windows with different colors indoor and outdoor.

3)Beneficial to health

The heat exchange between human body and environment depends on the indoor air temperature, air flow speed and outdoor air temperature. By adjusting the indoor temperature of doors and windows, the temperature shall not be lower than 12~13 ℃ to reach the most comfortable environment.

4)Prevent condensation and reduce noise

The temperature of the inner surface of the profile with heat insulation strip is close to the indoor temperature, reducing the possibility of indoor moisture condensation on the profile surface due to supersaturation. The insulating glass is used to improve the thermal insulation performance and sound insulation effect, effectively reduce the resonance effect of sound waves, prevent the transmission of sound, and reduce the noise by more than 30dB.

5)Energy saving

In winter, the window frame with heat insulation strips can reduce 1/3 of the heat lost through the window frame; In summer, if there is air conditioning, window frames with heat insulation strips can reduce energy loss more. The application of heat insulation systems can reduce energy consumption and reduce environmental radiation caused by air conditioning and heating.

6) Anti-theft, anti-loosening device: equipped with unique multi-point hardware lock, to ensure the stability and safety of windows in use.

APPLICATIONS:
Windows and doors; Curtain walls; Glass wall, Furniture; Ceiling; LED; Transportation; Vehicle; Solar System; Industrial; Decoration;Heat Sink etc;

Why choose us:
1.Heat insulation strip material selection nylon 66 (PA-66) and add 25% glass fiber (GF25), more tensile, hard enough, wear resistance, relative to other general plastics high temperature resistance.
2. Complete products: The company has a full set of production line equipment, with rich production experience and large-scale production capacity
3. Quality assurance: the purchased goods are produced from the source, integrity management quality assurance, strict inspection before leaving the factory, to ensure that the products qualified.
4. Convenient and worry free: We have a strong after-sales service team, technical personnel to communicate specific details for you to answer in detail, better understand your needs, quickly complete the products you need.
5. Professional guarantee: years of industry experience, continue to provide high-quality products for various industries, to provide you with higher quality service.
6. Free drawing, quick sample, support mass production customization.
7. Processing equipment, complete set, sound insulation noise reduction, firm and reliable.
8. Provide customers with solutions and one-to-one customized services.
9. Experienced designers provide strong technical support.


Pre-sales Service:
1)Provide technical guidance according to customer requirements.
2) Assist customers in designing and making schemes according to technical feasibility.
3) Provide equipment demonstration for customer research, sample making and testing.

After-sales service:
1) Hardware fittings of broken bridge aluminum windows are guaranteed for 1 year;
2) Lifelong maintenance;
3) Provide technical support.

Company info:

FAQ :
Q: How long is your delivery time?
A: Generally, it will take 7-15 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: What is your terms of payment?
A: 50% T/T in advance, balance before shipment.

Q: What is Warranty Policy?
A: We provide 1 year warranty.
When the warranty expired, our company will still give you technician support for free. But the replacing part is not free.
In other words, we provide lifelong after sale service to you as long as you use our broken bridge aluminum products.

Q: How to receive my order? Is it safe during shipping?
A: For the items you purchased, we will arrange shipping by sea or international express. It shall be quite safe during shipping by sea or air.

Don't hesitate to contact us if you have any questions.

Lydia

E-mail: lydia@szpolywell.cn

Tel: +86-15601568506 (WhatsApp)

Address: Yangshe Town, Zhangjiagang City, Jiangsu Province, China.