LX Type Single Girder Overhead Beam Bridge Suspension Crane With
Hoist
Product Description
LX Type Single Girder Overhead Beam Bridge Suspension Crane With
Hoist is used together with CD1 and MD electric hoist to become a
light and small crane with rail operation. Used in machinery,
assembly and warehouse. This product is ground operated. The
working environment temperature is -25℃-+40℃. It is forbidden to
work in the environment of inflammable, explosive and corrosive
media.
LX Type Single Girder Overhead Beam Bridge Suspension Crane With
Hoist (hereinafter referred to as the crane) is designed and
manufactured in accordance with the standard jb2603-2008, and is
used in conjunction with CD1, MD1 and other forms of electric
hoist, becoming a light and small rail-running crane. Its
applicable lifting weight is: 0.5t-5t, applicable span is 3-16m,
and the working environment temperature is within the range of
-20-+40 degrees.
Product Characteristics
This product is a general purpose crane, mostly used in mechanical
manufacturing, assembly, warehouse, caves and other places. The
crane is mainly composed of bridge (metal structure) electric
hoist, operating mechanism, electrical equipment and other four
parts. The structural characteristics of each part are as follows:
1. Metal structure
Main girder (bridge) is divided into two forms, small tonnage,
small span of the product of the main girder by the shape steel
(beams ten channels) and USES no beam structure form, large
tonnage, large span of the product, main girder is USES the steel
plate rolling forming, the main, beams with a small Angle allows
swing single hinge (pin) connection, make each wheel crane can
better contact with track, from impending, moreover due to connect
the detachable, transportation is convenient.
2. Electric hoist
The electric hoist can lift the weight and move along the main beam
longitudinally. Its specific structural form and characteristics
are shown in the instruction manual of the electric hoist.
3. Operating mechanism
The product is driven in the form of separate drive, the drive
brake is completed by the conical brake motor, and the drive is
driven by the "one open one closed" gear, the specific structure is
almost completely the same as the CD1, MD1 electric hoist running
car.
4. Electrical equipment
This product is ground control situation, motor squirrel cage,
electrical control is simple, users can according to figure 1,
figure 2 to assemble electrical appliances, wire laying see the
electrical schematic diagram, wiring diagram. The crane is equipped
with lifting limit, terminal stroke switch and so on. If the user
does not put forward any requirements, we will supply the pulley
collector. If the user has special requirements on the installation
size of the collector, the user can change it by himself. Power
supply wire pulley collector can be using ф 8-10 round steel
erection crane rail should be good grounding, grounding resistance
should not be greater than 4 ohms.
Parts Of Crane