LED Display 4 Placing Tank Solder Paste Machine Solder Paste Warm Up Machine
|
|
LED Display 4 Placing Tank Solder Paste Machine Solder Paste Warm Up Machine
Introduction
Solder paste check right machine, also called solder paste warm up machine, and solder paste aging machine, with the timer, the machine can easily achieve the control of the solder paste temperature warm up time, which can save much time to record the time of solder paste back to the ambient temperature after take out off the refrigerated room. It is a efficiency way to control the temperature of the solder paste, make sure the activity of the solder paste, ensure the printing quality, better to control the production plan, improve production efficiency.
SMT manufacturers usually store solder paste in sealed and refrigerated refrigerators to meet quality assurance requirements. The solder paste is usually refrigerated at a temperature of 0-10 degrees Celsius and sealed to prevent oxidation. The solder paste needs to be tempered before use. Usually the tempering time is about 4 hours. The purpose is to restore the activity of the refrigerated solder paste and make it easier to use. Our solder paste rewarming machine is an intelligent management device that integrates solder paste refrigeration storage, rewarming, stirring, traceability and direction traceability functions. The refrigeration temperature can be controlled within the range of 1-10 degrees Celsius, and the temperature can be controlled through numbers and temperature. Curve monitoring and recording, first in first out, to meet the storage and use requirements of different solder pastes.
The reheating function of the solder paste reheating machine can control the reheating temperature at 18°-28°. Users only need to set the reheating temperature according to different types and uses to ensure that the reheated solder paste can be used with Room temperature remains consistent. The reheating method of our solder paste reheating machine is mainly controlled by the exhaust fan, rather than the heating mode, which will not affect the quality of the solder paste after reheating.
In order to meet different usage scenarios, our solder paste reheating machine has three modes: automatic reheating of solder paste, manual scheduled rewarming, and recuperation by receiving MES work orders to ensure that it can be used right out of the box every time. , greatly improving production efficiency.
Features
1, Each tank of solder paste placement slot has an independent LED
display time controller. After setting the time the solder paste
will be fixed in the slot and sink automatically,also it will
release automatically when time is over. 2. With FIFO fuction. 3. In the case of out of power accidently,even if not reach setted time, solder paste bottle will automatically pop up. 4. Equipped with a automatic alarm system,when reach the setting time, this machine will automatically alarm. Also there is a emergency stop button for emergency suitation, easy operation and security. Specification
Steps
5. After use, turn off the power switch;
|
||||||||||||||||||||||||||||||||||||||||
|
PLC Contro Inteligent Solder Paste Thawing Machine Warm Up Machine With Printing Function |
|
Automatic Solder Paste Thawing Machine SMT Solder Paste Defrosting Equipment Supplier |
|
Non-Standard Solder Paste Thawing Machine With Customizable Capacity And Top- Electrical Components |
|
High-Precision Automatic Solder Paste Thawing Machine for SMT Production Lines |
|
Fully Automatic SMT Solder Paste Mixer Multi-Functional Solder Paste Machine For PCB Assembly Line |
|
5 Tank Solder Paste Warm Up Machine Solder Paste Warm-Up Timer Machine Temperature Back Machine |