Tablets Drugs Die Exchangeable Pill Press Machines
Introduction of tablet press machine
Tablet press machines are mainly used for tablet process
research in the pharmaceutical industry. TThe tablet press
machinery meets the requirements of GMP. The whole shell is made of
stainless steel, and the chamber is separated from the outside
environment by the organic glass, with good sealing.
Features of automatic pharmacy tablet press machine:
1.High pressure, this pharmaceutical tablet press machine adapts
"Down pressure guide", the pressure is big, can suppress the hard
material.
2.The tablet press machine equips high equipment configuration. The
core components are all famous brand products such as German
SIEMENS and Japanese OMRON, with long service life and low failure
rate.
3.With pressure overload protection device. The pill press machine
will start the overload protection through the spring pressure,
alarm lights, automatic stop running.
4.The principle of pill compress machine eccentric torque is used
to protect the die and machine. Compared with the hydraulic
overload protection, it has a fast reaction speed and no oil
pollution
5.The tablet press machine has intelligent lubrication system. The
technology of BIJUR DELIMON, USA, is used to provided timely,
quantitative and timely refueling for parts that need lubrication.
The quantity of oil can be flexibly adjusted according to the
specific environment of customers.
| Model | ZP-55 | ZP-51 | ZP-41 | | Dies No. | 55 set | 51 set | 41 set | | Max. Production Capacity | 260000/h | 220000/h | 160000/h | | Max. Pre-pressure | 20KN | | Max. Pressure | 120KN | | Max. Dia. of Tablet | 13mm | 19 mm | 25 mm | | Max. Depth of Filling | 18mm | 18mm | 18mm | | Max. Thickness of Tablet | 8mm | 9mm | 9mm | | Power of Motor | 7.5kw | | Weight of Machine | 2000kg | | Outline Dim. | 1220×1120 mm | | Packing Size | 1600×1300×2160mm | | Packing size of Dust Collector | 960×620×1460 mm |
|
Lower pressure wheel shaft and the lower rail guide are installed
with the casting subtraction structure (new patent), which is
convenient for disassemble, maintenance and replacement. Because
under the pressure of wheel and rail down in 3 years of running,
possible wear, need to be replaced, if use the old methods in the
past, you need one day to remove, it is very time-consuming, and
the casting structure requires only one hour can be completed.
