20 Mm Micro Stepper Motor Matched With Gearbox 18°/Step 2 Phases

This permanent magnet stepper motor is 20mm in diameter, has a torque of 60gf.cm, and can reach a maximum speed of 3000rpm.
This motor can also be added to the gearbox, the motor step angle is 18 degrees, that is, 20 steps per revolution. When the gearbox is added, the motor deceleration effect rotation angle resolution can reach 0.05~6 degrees. Applicable to many needs, precise control of the rotation position.
The coil resistance of the motor is 9Ω/phase, and it is designed for low drive voltage (about 5V DC). If the customer wants to drive the motor at higher voltage, we can adjust the coil resistance to match it.
In addition, there are two M2 screws on the cover of the motor, they are used to fix with the gear box. Customers can also use the screws to fix this motor to other parts.
Its connector is 2.0mm pitch (PHR-4), and we can change it to another type if the customer wants to.
Therefore, this product can be used where precise position control is required. It can be generally used in medical equipment, printers, automation equipment, robots, etc.