Zero Momentum NEMA14 Position Control Stepper Motor For ATM Machine 35BYG
|
Detailed Product Description
35BYG 1.8 °NEMA14 position control stepper motor 2 phase hybrid stepper motor 35mm stepper motorOur stepper motor series are: 20mm, 28mm, 35mm, 39mm, 42mm, 57mm,
60mm, 86mm, 110mm, 130mm. Two-phase, three-phase and four-phase
hybrid stepping motor. The DC brushless motor range includes 42BLS,
57BL(S), 86BLS, and matching DC brushless drivers. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| No. | ITEM | SPEC. | REMARKS |
| 1 | Voltage | 9.5 VDC | |
| 2 | Source Voltage | 24 VDC | Indicates the voltage that the power supplier applys to the driver circuit. It is same as the rated voltage when motor is drived on a constant voltage model. |
| 3 | Phase | 4 Phase | |
| 4 | Rated Current | 0.19 A /Phase | Peak value when microstep |
| 5 | Exciting mode | Unipolar | |
| 6 | Step angle | 1.8 deg | ±7％ |
| 7 | Rotation | CW/CCW |
Electrical Characteristics
| No. | ITEM | SPEC. | TEST CONDITION | REMARKS |
| 1 | Resistance | 50±10％Ω | At 20℃ | Each phase |
| 2 | Inductance | 30±20％mH | At 1Hz,0.3 Vrms | Each phase(Ref.) |
| 3 | Holding Torque | ≥500 g.cm 500 g.cm min | ||
| 4 | Detent Torque | ≤120 g.cm 120 g.cm max | ||
| 5 | Step Angle Accuary | ±5％ | Constant Current Driver/ 12V/Two Phase on/Rated current/Speed:1pps | |
| 6 | Slew Rate with no load | —— | Source Voltage 24V/ Rated current//Half step | |
| 7 | Pull-in rate with no load | —— | Source Voltage 24V/ Rated current//Half step | |
| 8 | Dielectric Strength | ≤1 mA 1 mA max. | 600VAC,1 second | |
| 9 | Insulation Resistance | ≥100 MΩ 100 MΩmin. | 500VDC | Between coil and endbells |
| 10 | Insulation class | Coil class B | ||
| 11 | Temperature rise | less than 80℃ |
Mechanical Characteristics
| No. | ITEM | SPEC. |
| 1 | Outline Dimentions | See technical drawing |
| 2 | Rotor Inertia | 10 g.cm2 |
| 3 | Weight | 0.11 kg |
| 4 | End play of the shaft | 0.08mm@500g.f |
| 5 | Radial play of the shaft | 0.02mm@500g.f |
Environmental Performance
| No. | ITEM | OPERATING | |
| 1 | Operation environment conditions | Ambient temperature | -20℃～+50℃ |
| Ambient Humidity | 15～85%RH No condensation | ||
| 2 | Storage environment conditions | Ambient temperature | -30℃～+70℃ |
| Ambient Humidity | 15～85%RH No condensation | ||
The above products are only representative models, we can customize the products according to customer requirements. Includes the length and diameter of the shaft.Our company can also provide OEM services.
Product Detail Presentation
Related Products
|
Hybrid Position Control Stepper Motor / Nema 11 Stepper Motor 28BYG301-25K-C |
|
NEMA11 2 Phase Position Control Stepper Motor For 3D Printer 28BYG201 |
|
35mm Nema 14 Stepper Motor , 2 Phase Hybrid Stepper Motor Low Noise 35HS34 |
|
Durable NEMA11 Closed Loop Stepper Motor 1.8 Degree Per Step 28BYG |
|
Low Noise Position Control Stepper Motor NEMA11 Easy To Install 28BYG304 |
|
42mm 0.9 Degree Stepper Motor , Small Dc Electric Motors NEMA17 42BYG |
Email to this supplier