Large Capacity Silica Spiral Sand Washer Low Energy Consumption 350 T/H

Large Capacity Silica Spiral Sand Washer Low Energy Consumption 350 T/H

Spiral Sand Washer Quartz Sand Washing Machine Basic Information:

The spiral sand washing machine is suitable for washing, grading and removing impurities in metallurgy, building materials, hydropower and other industries, and is used for washing of fine-grained and coarse-grained materials. It is suitable for sand for construction and gravel for road construction. The spiral sand washing machine has low power consumption and high washing degree. The sealing structure is good, the fully enclosed transmission device and the adjustable jaw plate ensure the product is characterized by high efficiency, durability, good cleaning and dehydration effect, and stable stability of fine grain products.

Double Screw Sand Washing Machine Structure:

It consists of a trough body, a reducer, a motor, a central shaft, a spiral blade, and a bracket. The bracket is welded on the central shaft, and the spiral blade is mounted and then pressed with a bolt to deform the blade without the lower body.

White Lai Screw Sand Washer Models:

How to Maintain a Spiral Sand Washing Machine for River Sand, Artificial Sand Washing?

1. Due to the large twist of the machine, it is recommended to install the machine on the concrete foundation. The pre-embedded weldment is installed on the foundation for welding during installation. The foundation depth and area are calculated separately according to the soil conditions. The recommended base weight is approximately 3 times the weight of the machine. , the machine installation dimensions refer to the base map.

2. After the installation is in place, check whether the gear of the reducer is displaced, whether the gap between the water tank and the big wheel bucket is the same. After the adjustment, fix the machine to the foundation.

3. Lubricating oil should be added to adjust the oil level, generally 50% below the shaft center.

4. After the machine is installed and adjusted, the test run shall be carried out. The no-load test shall be:

(1) Continuous operation for 2 hours

(2) All solid parts should be firm and free of looseness

(3) There is no abnormal sound in the reducer and gear box

White Lai Sand Washing Plants: