Custom Stainless Steel Rolling Shutter Gate Door For Buildings Stainless Steel Roller Gate Maintenance - The upper end of the installation position of the rolling gate
should have reliable fireproofing facilities. The detachable
movable cover must be set at the lower end of the reel of the
rolling gate. 500×500mm must be reserved at the lower end of the
rolling gate. Remove the hole for easy maintenance.
- If there is a large jitter or abnormal sound during the operation
of the rolling gate, stop the inspection and remove the debris that
hinders the normal opening and closing of the curtain.
- Roller door curtains and rust-prone parts should be regularly
treated with anti-corrosion, paint and maintenance. It is forbidden
to impact the facade with heavy objects and hard objects.
- The upper limit position of the bottom of the rolling gate must be
kept at a distance greater than 200mm from the lower end of the
bearing frame to ensure that the topping phenomenon does not occur
when the brake is stopped.
- During the process of opening and closing, the rolling gate should
have the function of stopping with the position, and should not
stop and continue to slide down. If the sliding distance is greater
than 50mm, the rolling gate control appliance and the roller door
brake should be immediately applied. Carry out careful inspection
and repair, and run normally.
- The rolling door machine in the operation, taxiing, transmission
and other parts should be regularly checked (at least 3 times a
year), and timely refueling as needed to ensure the normal use of
the rolling gate.
- When the shutter is operated, the operator must stand at a position
where the operating state of the rolling door can be seen,
otherwise it is prone to accident and damage.
- All electric-controlled rolling shutters must be opened and closed
in the same direction as the switch box. Especially when the new
power-on test or external input power conversion phase line should
be used, the manual device should be used to place the curtain at
the door height 1. 2 position, after the power is turned on, try to
open and close the roll door until it is attached to the
instruction, otherwise it can be used normally, otherwise the
limiter will be damaged, causing damage caused by rolling shutters
or topping.
- Roller shutters and roller shutters are prohibited from coming into
contact with acid and alkaline solutions to prevent corrosion of
the curtain surface.
Custom Stainless Steel Rolling Shutter Door Gate For Buildings - Rolling gates, also known as "rolling shutters", are connected in
series with a number of articulated flaps. In a fixed chute, the
upper and lower doors are rotated around the reel above the door.
The rolling shutter is suitable for public places or houses such as
commercial facades, garages, shopping malls, hospitals, factories
and mines.
- The gate is suitable for public places or houses such as commercial
facades, garages, shopping malls, hospitals, factories and mines.
- In particular, the door opening is large, and it is convenient and
quick to open the place where the ground door body is inconvenient.
Such as for garage doors, shopping malls, fire shutters, hangar
doors.
- There are two common control methods for rolling shutters:
1, wireless remote control, common 433MHz wireless remote control
handle control;
2, external system control, with the development of information
technology, this method is also increasingly used, such as electric
door automatic release system through embedded control system or
computer control, the computer automatically recognizes the vehicle
number plate, automatically open the door Stainless Steel Rolling Shutter Door Gate Classification The manual pull-up switch is achieved by balancing the force with
the torsion spring on the central axis of the roller blind. The special motor is used to drive the central axis of the roller
blind to rotate, and the roller shutter switch is reached, and
automatically stops when it is turned to the upper and lower limits
set by the motor.
Special motors for rolling gates include: external roller
shuttering machine, Australian roller door machine, tubular roller
door machine, fire roller door machine, inorganic double curtain
roller door machine, fast rolling door machine, etc. Even if the grid shutter is closed, it will not give people the
feeling of being stuffed into the box, and it will still be
ventilated. And it can be used with aluminum alloy shutters to
achieve ventilation and prevent peeping The crystal shutter is made of imported top-quality non-breaking
bulletproof and anti-theft film. It has the effects of
transparency, anti-theft, rain, dust and sound insulation. It is
widely used in banks, shopping malls, shops, telecommunications,
subway stations and other places to pursue a safe and stylish
style. The ideal choice. It has beautiful color, smooth and horizontal embossed design, and
has a layered three-dimensional sense; the door surface is treated
with baking paint to make the door panel more durable; a variety of
installation methods are available for selection, installation is
simple, construction speed is fast, and the construction period is
saved. , can save costs by single curtain replacement.
Stainless steel roller shutters: stainless steel tube shutter,
stainless steel roller shutter, stainless steel chess shutter,
stainless steel closed shutter. The stainless steel shutter is
mainly made of 304# 201# stainless steel, and the stainless steel
is made into different profiles: stainless steel tube, stainless
steel sheet and so on. According to different needs, it is
processed into different profiles of stainless steel rolling
shutters: it is widely used in banks, high-end shopping malls,
stations, schools and other places. Stainless steel tube rolling
gates are mainly assembled from high quality stainless steel tubes,
stainless steel hanging pieces and guide rails. The appearance is
practical and generous, and the service life is long. The stainless
steel tube shutter has a good perspective effect and ventilation
effect, and can also play a very strong isolation and anti-theft
effect. It is favored by many modern merchants and door and window
users, and has become a beautiful landscape of the modern city.
Stainless steel sheet rolling gate is also called stainless steel
through the door, mainly made of excellent 304# stainless steel
sheet, stainless steel tube, guide rail and stainless hanging
piece! Comprehensive features: It has a good perspective and
aesthetics. Stainless Steel Roller Shutter Door Gate Features - Anti-pushing device prevents the door from being shaken by force
means and is safe and burglarproof.
- (Optional) The humanized design of the automatic rebound of the
obstacle prevents the collision of the vehicle object when the door
body falls, so that the person or the vehicle passes smoothly. The
door is sturdy and can be equipped with (optional automatic alarm
device) and anti-pushing device to prevent the door from being
forced by force, continuous alarm and security.
- According to the different characteristics of the building, you can
choose three different installation methods: interior, exterior and
middle. After opening, the roller blind is wound up in the upper
part of the door, saving the interior space of the garage and not
mixing dirt, rain and snow. Brought into the garage, the appearance
is beautiful and stylish.
- The door body is novel and beautiful, flexible, compact, and can be
widely used in the inner and outer doors of buildings.
- The door body is driven by electric power, which is light and
flexible. The upper and lower strokes are automatically controlled
by the limit switch, which is convenient to operate, safe and
reliable. It can be operated manually during power failure.
- There are many types of door bodies, among which the fully enclosed
door body has good sealing performance, and can be windproof,
dustproof, heat preservation and corrosion resistant. The door body
can also be fireproofed after special treatment.
- The rolling door machine has advanced structure, complete functions
and overheat protection device, which can protect the motor from
damage during overload and high temperature.
- A remote control can be installed to enable the electric shutter to
be opened and closed remotely.
- The electric shutter gate profile is the main part of the electric
shutter gate door and window, and its performance determines the
performance of the entire door and window. The composite electric
shutter gate adopts high-quality aluminum alloy (steel)
double-layer rolling forming, and the exterior is treated with
multi-layer baking varnish. The middle is filled with poly-alkali
insulation foaming material without fluorocarbon, and the precision
production process is adopted. The electric rolling shutter door
produced by the manufacturing technology has beautiful appearance,
soft color and horizontal embossed design, which reflects the
layered beauty. The winding diameter is small, sturdy and durable,
suitable for new and old buildings.
- The newly launched milky white curtain series is elegant in style
and creates a strong decorative atmosphere. Other colors can be
customized according to customer requirements (light gray, brown,
bronze, cream, sand and sand, etc.) According to the scope of the
scope of science, the application range is very wide, and it is one
of the most popular architectural decorations in the world.
A. Intelligent infrared anti-climbing device: When a person climbs
the door, the system will immediately alarm, thus ensuring the
safety inside the door.
B. Special profiles: Adding different geometric shapes and bones to
high-hardness zinc-aluminum alloy profiles can greatly enhance its
strength. The surface is treated by special electrophoresis, the
gloss is infinite, it is not easy to stick dust, it is not corroded
by polluted gas, and it will never rust. The new period is long. C.
Engineering plastics: The main plastic parts of the door body (such
as the connection between pipe and pipe, plastic parts, movable
parts of the door, etc.) are made of high-quality engineering
plastics (such as PC, PA), high toughness, impact resistance, and
resistance to distortion. Wear-resistant, freeze-resistant,
light-resistant, not easy to aging, long service life, free from
wind, snow, lightning, sun and rain.
D. Intelligent infrared probe anti-collision device: 30-50cm of
people or foreign objects can be automatically returned to the door
during the closing process, thus ensuring the safety of vehicles
and pedestrians. Standard structure: the inner space of the door
row (that is, the distance between the two main bends adjacent to
each other, excluding the main tube size) adopts the standard size
of the shutter gate 320mm (refer to foreign technology) to ensure
the cross tube is the most solid and greatly reduces the running
noise.
E. Unique process The main frame profile of the door body is made
of plastic parts. The screw fixing of the connection position
adopts the invisible design to improve the appearance of the door
body. The connection between the profile and the plastic parts
adopts the processes of punching, pressing and drilling. The
structure of the door is firm and there is no solder joint. The
latest cross-connect design: the cross tube is made of special
technology and is equipped with a super PA wear sleeve. The tight
combination with the round tube not only makes the door row
structure firmer, but also ensures smoother operation.
F. The characteristics of electric shutters beautify the
environment, improve the appearance of the company, enhance the
corporate image; help to create a civilized enterprise, civilized
factory, civilized city atmosphere; improve safety, even if there
is damage or overturn in the middle of the night, immediately call
the police. Dongguan electric shutters are mainly used in living
quarters, government schools, enterprises and institutions. The
electric shutter is connected in series with the multi-joint
movable door. In the fixed slide, the upper and lower doors are
rotated around the reel above the door. Applicable to public places
or houses such as commercial facades, garages, shopping malls,
hospitals, factories and mines. Especially the door opening is
large, and it is inconvenient to install the ground door body. |
