Standard Size Fiberglass Housing smc friberglass shell Gel coat paint Surface

Company Introduction: Qingdao Lanmon Industrial Co., Ltd. is located in Huangdao District, Qingdao Yuanjiazhuang community. Covers an area of 11,000 square meters, construction area of 8,000 square meters, a registered capital of 10 million yuan. Specializing in the production of hand lay-up composite materials (FRP), RTM composite materials(FRP), SMC composite materials (FRP) and other products, used in rail transit, automobiles, engineering vehicles etc, is a research-based enterprise with desigh & research, production, sales and service.

With existing staff of 60, of whom five were senior technicians, technology and technical personnel 10. Company's products have passed the ISO9000 certification, strict control of the product quality, thus ensuring the quality of products, formed from R & D, testing to mass production of modern industrial scale.

Specifications:

Key Specifications/Special Features:

1st:Mould treatment:
Polish: Mould must be polished before production which will guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the mould which will make no dark markings in the
gel coat surface.
Release agent: This will be brushed on the mould to make ejection easily.

2nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added.
Surface mat: This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the finished
surface.
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and 450g/m2 (0.9mm thickness). According to your
requests on the thickness and strength, we will calculate how many layers of fiberglass mat should be used.


3rd
Solidify: The time required for solidifying depends on thickness and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding.
Demould: After solidified, the product will be demoulded
Cut and trim: We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions



4th Adhesion: Professional mould and Temperature and worker

5th Surface treatment :

6th Painting

7th Package Solution:
Our principle: Safe and economical
We choose economical packaging on condition that there will be no damage during transportation.Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder cmpany.