Semi Automatic Pipe Cutting Machine

 
Introduction:

The machine can be divided into manual type and pneumatic type. The manual type machine uses a European high-strength machine head, equipped with a high-efficiency worm gear and worm gear drive, so that the aluminum cutting rate is high, no noise and no flash. The feed is manual, the head can be rotated 45° to the left and right, the angle is clearly marked, and the 45°-90-45° column is added to make the adjustment easier. It is equipped with manual two-way clamp and automatic cooling system.

Metal circular saw is a hydraulic type machine. The vertical slide way advances and retracts the knife, the feed structure is firm, the movement is accurate, and the floated seat is not damaged.

The reason why the cutting accuracy of metal circular sawing machines is higher than that of band sawing machines is that circular saw blades are used in metal circular sawing machines, while band sawing machines are used in band sawing machines. There is no swinging when sawing circular saw blades, and the stability is high. When the band saw blade swings, the surface is not smooth even after cutting.

Features:

1. Pneumatic/hydraulic types are equipped with automatic feed and automatic clamping devices, which are characterized by stable operation, easy operation, low labor intensity and high efficiency.

2. Equipped with a circulation cooling system, the corresponding cutting fluid can be used to extend the life of the saw blade and the quality of the cut surface. The incision has no burr and dust.

3. According to the control mode, this type of machinery can be divided into manual, semi-automatic and fully automatic.

4. The control interface of the automatic circular saw machine adopts a PLC-based operating system, usually with a touch screen and operation panel.

5. Using human-machine interface, only the operator enters the specifications of the material, the number of processing parameters, etc., the system will automatically adjust the saw blade's blade rotation speed, feed amount per tooth (cut-off speed) and other complex parameters according to the input parameters. In order to provide operators the easiest way to operate.

6.High control accuracy and fast cutting speed.