High Strength Radial Drilling Machine

High strength radial drilling machine Z3063 for Metal Drilling

Z3063 hydraulic radial drilling machine is mainly used for drilling, reaming, reaming and tapping on large and medium-sized castings and steel parts.

Z3063 radial drilling machine requires temperature of 0 to 45 degrees Celsius, atmospheric pressure of 86 to 106 Kpa, good air cleanliness, dust concentration of not more than 10 mg/m3, no acid, alkali corrosion and toxic gases, no explosion hazard. There is conductive dust, there is no rain or snow in the workshop, the ground is smooth, clean, and the indoor light is sufficient.

Note: The machine is installed away from sources such as vibration sources and heat sources.

Parameter of 63mm hydraulic radial drilling machine:

1. The hydraulic pre-selection shifting mechanism can save auxiliary time.

2. The spindle is reversing, parking (braking), shifting, neutral, etc., controlled by a handle, and the operation is light.

3. The headstock box, rocker arm and inner and outer columns are hydraulically driven diamond-shaped block clamping mechanism for reliable clamping.

4. The rocker arm guide rail, the outer cylindrical surface, the main shaft, the main shaft sleeve and the inner and outer column rotary raceways are quenched, which can maintain the stability of the machine tool for a long time and prolong the service life.

5. there are perfect safety protection devices and outer column protection.

6. In the structural design and in the manufacturing process, a series of effective measures have been taken to make the durability of the machine tool and the service life of the machine greatly extended.