Horizontal Lathe CA6261 Manual Bench Metal Gap Bed Lathe Machine
CA series of ordinary horizontal lathe is suitable for turning inside and outside cylindrical surface,
conical surface and other rotating surface, turning various metric
and inch, modulus and pitch thread, and can carry out the work of
drilling and pulling oil groove, is a very versatile horizontal
lathe, widely used in all kinds of shaft and disc parts of the
batch processing.
| Specifications | CA6161 CA6161B CA6161C | CA6261 CA6261B CA6261C |
| Max. Swing over bed | 610mm |
| Max. Swing over carriage | 370mm |
| Max. swing in gap | -- | 830mm |
| Effective gap length | -- | 210mm |
| Max. length of work piece | 750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm |
| Width of bed | 400mm |
| Section of turning tool | 25x25mm |
| Spindle | Spindle speeds | 10-1400rpm/16-1400rpm(24steps) |
| | Hole through spindle | 52mm. (80mm). [105mm] |
| | Spindle taper | NO.6(MT6)(Φ90 1:20)[Φ113 1:20] |
| Feed | Number of feeds | 64 kinds(for each) |
| | Range of metric threads(kinds) | (1-96mm)44 kinds |
| | Range of inch threads(kinds) | (2-24tpi)21kinds |
| | Range of module threads(kinds) | 0.25-48 (Moduie39kinds) |
| | Range of pitch threads(kinds) | 1-96DP(37kinds) |
| Tailstock | Max. tail stock spindle travel | 150mm |
| | Tail stock spindle diameter | 75mm |
| | Taper of tail stock spindle center hole | NO.5(MT5) |
| Main motor | 7.5KW(10HP) |
| Packing dimensions (L*W*Hmm) | Overall dimensions for750mm | 2550x1140x1750 |
| | Overall dimensions for1000mm | 2700x1140x1750 |
| | Overall dimensions for1500mm | 3200x1140x1750 |
| | Overall dimensions for2000mm | 3700x1140x1750 |
| | Overall dimensions for2200mm | 4030x1140x1750 |
| | Overall dimensions for3000mm | 4850x1140x1750 |
| | Overall dimensions for4000mm | 5800x1140x1750 |
| Weight (kg) | Length | G.W N.W. |
| | Weight for 750mm | 2100 1990 |
| | Weight for 1000mm | 2190 2070 |
| | Weight for 1500mm | 2350 2220 |
| | Weight for 2000mm | 2720 2570 |
| | Weight for 2200mm | 2800 2600 |
| | Weight for 3000mm | 3300 3200 |
| | Weight for 4000mm | 3500 3400 |
1.CA series of ordinary horizontal lathe is suitable for turning
inside and outside cylindrical surface, conical surface and other rotating surface, turning various metric and inch, modulus and pitch thread, and can carry out the work of drilling and pulling oil groove, is a very versatile horizontal lathe, widely used in all kinds of shaft and disc parts of the batch
processing.
2.This series of lathe bed width in general lathe, rail width 400mm
has a high stiffness; guide rail surface is quenched by medium
frequency, and is durable.
1. What is the payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before
shipment
When we receive the advance payment, we will start to make
production.when the machine is ready , we will take pictures to
you.after we got your balance payment. we will send the machine to
you.
2. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
3.When is the delivery time?
A: If the machine you will order is standard machine, we can ready
the machine within 15days. if some special machines will be some
longer. The ship time is about 30 days to Europe, America. If you
are from Australia, or Asia, it will be shorter. You can place
order according to delivery time and ship time.we will give you the
answer accordingly.
