Valid working space | Customizable |
Max design pressure | 10-100bar |
Pressure time | It takes no more than 25 min to reach 58 bar. |
Cooling time (full load) | Cooling time for sintering Temperature 1450℃～100℃: 7-8h (WaterTemperature≤30℃, 55bar≤pressure≤58bar) |
| Max.loading weight | The load capacity depends on the product type) |
| Power rating | About 400KVA (The output power can be limited) |
Service life for furnace shell | 20 years |
Operating times for furnace shell | 6000 furnaces |
Max. Design Temperature | 1600℃(while vacuum sintering) |
Max. Working Temperature | 1550℃(vacuum and pressuring) |
| Pumping speed | The vacuum degree can reach 5Pa within 30min after starting the
pump. After reaching 5Pa and then pumping for 60min, the ultimate
vacuum value reaches 1Pa (within a cold, empty and clean furnace
that has been dried before). |
| Leakage rate | ≤3Pa/h (stop the pump group operation and start checking after
testing the limit vacuum (within a cold, empty and clean furnace
that has been dried before). |
| Wax yield rate | ≥98%(10Kg pure paraffin, argon negative pressure dewaxing. Measured
by three times of mean values at most). |
UPS guarantee time | It can power the indicator light and control the furnace during
power outage for more than 80 minutes. |
| Max.heating rate | 8℃/min (the room temperature rises to 1900℃within a vacuum and
empty furnace. 600℃, 1000℃, 1200℃ half-way insulation is allowed). |
