Customized Cable Gripper Hold Acoustic Ceiling Cable Hanging System
|
|
Customized Cable Gripper Hold Acoustic Ceiling Cable Hanging System
Acoustic ceiling suspension system - Application:
Acoustical ceiling tiles or panels lay in a suspended ceiling grid
and are used to improve or control the acoustics. These drop
ceilings are designed to absorb, block and diffuse sound. They are also used for these purposes: Keep outside noise out of the room, keep the noise created in the room from being heard outside of the room, or simply to improve the quality of sound in the room. The last purpose is deemed the most important when the tiles are used in recording/sound studios and home theaters.
Acoustic ceiling suspension system - Installation and Benefits: Many acoustic or acoustical ceiling tiles can be installed in
drop/suspended ceiling grids. Suspended ceilings were originally developed as an inexpensive way to hide the wiring, plumbing, or ductwork, or to allow those features to be easily maintained. But it quickly became clear that acoustic ceiling tiles can be used to add acoustic control to the room.
Products Description:
Technical parameter:
Attaching the suspension system to the structure (eg. concrete soffit): Ensure that the structure is solid and has a load-bearing capacity of at least 10 kg. When fixing a concrete structure, drill a hole 30 mm deep with a 6 mm diameter drill bit. Protect the M6 thread on the top fixing dowel before tapping it into the drilled hole. Before proceeding with the installation, check that the dowel has expanded properly. At this stage, only the thread should be visible. Attach the wire to the fixing points. Slide the wire into the hook, the system locks automatically. Raise the baffle and affix the hook to the spiral anchors on both fixing points. Attach the hooks to all of the spiral anchors. Ensure all hooks are attached before raising the baffle to the required height Product features: 1. Screw ceiling anchor with wire Two-part screw-on ceiling anchor with drop wire,Thimble size bullet
fitting nickel finish,Ideal fixing for ceiling panels and lighting. Ceiling anchors for attaching drop wires to plaster ceilings are
neat,quick to install and supplied at low cost. Suspended services in buildings such as acoustic panels, light
fittings etc require rapid and reliable fixing systems combined
with support wires. For lightweight building services applications
1.5mm wire cable can be relied upon to carry loads in excess of 10
kg per suspension point. These slender cables are both economical
and unobtrusive. Screw ceiling anchor for conventional ceilings. For plasterboard and similar conventional ceilings which will
accept a plug and screw fixing,the two-part ceiling anchor is
screwed to the ceiling capturing the supplied 1m or 2m length of
wire. 2. Suspension hooks self locking Suspension hooks with self locking facility a ideal for rapid. Installation and levelling up on site. Slide the hook up a support wire (1.5mm dia) and it locks fast
wherever it is placed. To lower simply depress the quick release button as shown on the
image. The clutch mechanism is released until the suspended item is
at exactly the right height. Excess wire can then be snipped off.It
is much easier to level up acoustic panels, light fittings and
ceiling hung building services when the adjustment can be performed
at the suspension point rather than at the ceiling. The safe Hook has a spring catch across the mouth of the hook to
prevent accidental detachment. 3. Suspension fitting for rockwool acoustic panels This is a Spiral corkscrew type panel hanger for acoustic panels -
type panels , Economic alternative to panel fixings. Spiral anchors provide a convenient suspension point for certain
types of acoustic,ceiling panels made from rockwool which will
accept a screw-in corkscrew type fitment. Acoustic ceiling installers fitting suspended acoustic panels often
search for lower,cost installation components.
The spiral anchor and our associated fittings have proved a
successful alternative to the manufacturers' own branded components
offering significant savings. Spiral anchor suspension fittings can be used in conjunction with
our ceiling fixings,suspension cables and adjustable suspension
hooks to create a low cost solution.
Technical parameter:
Attaching the suspension system to the structure (eg. concrete soffit): Ensure that the structure is solid and has a load-bearing capacity of at least 10 kg. When fixing a concrete structure, drill a hole 30 mm deep with a 6 mm diameter drill bit. Protect the M6 thread on the top fixing dowel before tapping it into the drilled hole. Before proceeding with the installation, check that the dowel has expanded properly. At this stage, only the thread should be visible. Attach the wire to the fixing points. Slide the wire into the hook, the system locks automatically. Raise the baffle and affix the hook to the spiral anchors on both fixing points. Attach the hooks to all of the spiral anchors. Ensure all hooks are attached before raising the baffle to the required height Product features: 1. Screw ceiling anchor with wire Two-part screw-on ceiling anchor with drop wire,Thimble size bullet
fitting nickel finish,Ideal fixing for ceiling panels and lighting. Ceiling anchors for attaching drop wires to plaster ceilings are
neat,quick to install and supplied at low cost. Suspended services in buildings such as acoustic panels, light
fittings etc require rapid and reliable fixing systems
combined with support wires. For lightweight building
services applications 1.5mm wire cable can be relied upon to
carry loads in excess of 10 kg per suspension point. These
slender cables are both economical and unobtrusive. Screw ceiling anchor for conventional ceilings. For plasterboard and similar conventional ceilings which will
accept a plug and screw fixing,the two-part ceiling anchor is
screwed to the ceiling capturing the supplied 1m or 2m length of
wire. 2. Suspension hooks self locking Suspension hooks with self locking facility a ideal for rapid. Installation and levelling up on site. Slide the hook up a support wire (1.5mm dia) and it locks fast
wherever it is placed. To lower simply depress the quick release button as shown on the
image. The clutch mechanism is released until the suspended
item is at exactly the right height. Excess wire can then be
snipped off.It is much easier to level up acoustic panels, light
fittings and ceiling hung building services when the
adjustment can be performed at the suspension point rather
than at the ceiling. The safe Hook has a spring catch across the mouth of the hook
to prevent accidental detachment. 3. Suspension fitting for rockwool acoustic panels This is a Spiral corkscrew type panel hanger for acoustic panels -
type panels , Economic alternative to panel fixings. Spiral anchors provide a convenient suspension point for certain
types of acoustic,ceiling panels made from rockwool which will
accept a screw-in corkscrew type fitment. Acoustic ceiling installers fitting suspended acoustic panels often
search for lower,cost installation components.
The spiral anchor and our associated fittings have proved a
successful alternative to the manufacturers' own branded
components offering significant savings. Spiral anchor suspension fittings can be used in conjunction with
our ceiling fixings,suspension cables and adjustable suspension
hooks to create a low cost solution.
Our service: Complete Equipment&Factory Price More than 10 year of experience Best SEVICE
Our advantage: The materials used in all products are in line with EU ROHS standards. The products are subjected to strict salt spray test and tensile test at the factory to ensure the quality and safety of the products. Wire Rope Mate specializes in suspension application design, and the company's products are designed to reduce installation costs and increase flexibility. The company has advanced production equipment, high-precision CNC automatic lathes to meet the high-volume production needs of customers.
Company Profile Dongguan Wire Rope Mate Hardware Co., LimitedEstablished in April 10,2009, Dongguan Wire Rope Mate Co.,Ltd is a
professional manufacturer and exporter that is concerned with the
design, development and production of grippers, wire, swivels,
rocker arm ,aluminum reflectors, ceiling attachment, suspension
kits and assembly tool etc, wildly used in construction industry,
lighting, display industry and so on. All of our products comply
with international quality standards and are greatly appreciated in
a variety of different markets throughout the world.
Contact Persaon:
Susan Yang Mobile: +86 18926802440 Wechat: 18874061218 Skype: susanyang8912 WhatsApp:+86 188 7406 1218 Tel: +86 0769-8532 2312 EXT:8008 Fax: +86 0769-8549 3351 E-mail: susan@wireropemate.com Website: http://www.cablesuspensionkit.com |
||||||||
| Product Tags: Customized Cable Gripper Acoustic Ceiling Cable Gripper Hanging System Cable Gripper |
|
Adjustable Acoustic Ceiling Suspension System U-shaped Clip Panel Ceiling |
|
Customizable Acoustic Sound Absorbing Wall Panels With Adjustable Wire Kit For Led Ceiling Panels |
|
Easy to install high quality wire and cable jig with LED light source ceiling lamp U-clamp |
|
Acoustic Ceiling Suspension System Achieve the Perfect Acoustic Balance with Our Superior Solution |
|
Professional Acoustic Ceiling Suspension System for Optimal Sound Management Solutions |
|
Easy to attach chandelier acoustic panel wire kit suspension system sound deadening material |